參數資料
型號: 28222-14
廠商: Conexant Systems, Inc.
英文描述: ATM Transmitter/Receiver with UTOPIA Interface
中文描述: 自動柜員機發射機/接收機的UTOPIA接口
文件頁數: 53/161頁
文件大?。?/td> 1832K
代理商: 28222-14
value of 65,535 and stays at that value until read. If Enable One-Second Latching
of Line Counters [bit 13 in CONFIG_1 [0x00] is set, then at each one-second
interval defined by the input ONESECI, the current counter value is latched for
the following one-second interval, and the counter is cleared. If the counter is
again read in that one-second interval, the current value of the counter is read and
then cleared.
The LCV counter
[0x40] is
always
latched (and the counter cleared) by the
ONESECI input regardless of the setting of Enable One-Second Latching of Line
Counters. When this counter is read, the latched value is presented and then
cleared. Subsequent reads prior to the next ONESECI latching event produce a
value of zero.
CN8223
2.0 Functional Description
ATM Transmitter/Receiver with UTOPIA Interface
2.4 Status and Alarms
100046C
Conexant
2-19
2.4 Status and Alarms
The CN8223 automatically receives and generates alarms.
2.4.1 Status and Counter Interrupts
The status interrupt pin STAT_INT can be programmed to provide an interrupt on
any occurrence in the LINE_STATUS register [0x38]. Each of these signals
generates a receive status interrupt if the corresponding interrupt is enabled in the
EN_LINE_INT register [0x2D]. To determine if an interrupt is caused by a PHY
status event, the LINE_STATUS register is read. This clears the interrupts in that
register.
Two types of interrupts are provided: error and alarm. Error signals cause an
interrupt on each occurrence of an error condition. Error signals are bits 9
13 in
the LINE_STATUS register. Alarm signals provide an interrupt on change of
state. All other indications in LINE_STATUS are alarm indications.
Interrupt status bits for the line/PHY counter overflows are located in the
OVFL_STATUS register [0x3A]. The enables for these interrupts are in
EN_OVFL_INT [0x2F]. All counters are 16 bits. If a counter is set to interrupt, it
rolls over to zero when it exceeds its maximum value. If a counter is not set to
interrupt, it saturates at its maximum value of 65,535 and ignores further events.
To determine if an interrupt has been caused by a counter, the microprocessor
reads the OVFL_STATUS register.
If the interrupt for a particular counter is not set, the counter saturates at a
相關PDF資料
PDF描述
28233-11 ATM Transmitter/Receiver with UTOPIA Interface
28C010TRPDB-12 150 x 32 pixel format, LED Backlight available
28C010TRT1DE-15 1 Megabit (128K x 8-Bit) EEPROM
28C010TRT1DE-20 1 Megabit (128K x 8-Bit) EEPROM
28C010TRT1FB-15 1 Megabit (128K x 8-Bit) EEPROM
相關代理商/技術參數
參數描述
282222-003 制造商:TE Connectivity 功能描述:81044/12-16-2 - Cable Rools/Shrink Tubing
282223-003 制造商:TE Connectivity 功能描述:81044/12-16-3 - Cable Rools/Shrink Tubing
282224-003 制造商:TE Connectivity 功能描述:81044/12-16-4 - Cable Rools/Shrink Tubing
282224-1 功能描述:汽車連接器 ECONOSEAL RCPT CONT .5MM RoHS:否 制造商:Amphenol SINE Systems 產品:Contacts 系列:ATP 位置數量: 型式:Female 安裝風格: 端接類型: 觸點電鍍:Nickel
282225-001 制造商:TE Connectivity 功能描述:81044/12-16-5 - Cable Rools/Shrink Tubing