參數資料
型號： MAX14830ETM+
廠商： MAXIM INTEGRATED PRODUCTS INC
元件分類： 微控制器/微處理器
英文描述： SERIAL COMM CONTROLLER, QCC48
封裝： 7 X 7 MM, ROHS COMPLIANT, TQFN-48
文件頁數： 49/68頁
文件大?。?/td> 2356K
代理商： MAX14830ETM+
MAX14830
Quad Serial UART with 128-Word FIFOs
and Internal Oscillator
53
CLKSource—Clock Source Register
Bit 7: CLKtoRTS
Set the CLKtoRTS bit to 1 to route the baud-rate generator (16x baud rate) output clock to RTS_. The clock frequency
is a factor of 16x, 8x, or 4x of the baud rate, depending on the BRGConfig[5:4] settings.
Bits 6, 5: No Function
Bit 4: ExtClock
Set the ExtClock bit to 1 to enable an external clocking source (crystal or clock generator at XIN). Set the ExtClock bit
to 0 to select the internal oscillator for clocking.
Bit 3: PLLBypass
Set the PLLBypass bit to 1 to enable bypassing the internal PLL and predivider.
Bit 2: PLLEn
Set the PLLEn bit to 1 to enable the internal PLL. Set PLLEn to 0 to disable the internal PLL.
Bit 1: CrystalEn
Set the CrystalEn bit to 1 to enable the crystal oscillator. When using an external clock source at XIN, set CrystalEn to 0.
Bit 0: IntOscEn
Set the IntOscEn bit to 1 to enable the internal oscillator. Set IntOscEn to 0 to disable the internal oscillator.
GlobalIRQ—Global IRQ Register
Bits 7–4: No Function
Bits 3–0: IRQ[n]
The MAX14830 has a single IRQ output. The GlobalIRQ register bits report which of the UARTs have an interrupt pend-
ing, as enabled in the ISRIntEn registers.
The GlobalIRQ register can be read in two ways: either by reading register 0x1F of any of the four UARTs or by sam-
pling the 4 bits sent to the master on MISO during the command byte of a read cycle (full-duplex SPI) (see the Fast
Read Cycle section for more information).
IRQ[n] is set to 1 when the associated UART's internal IRQ is generated.
IRQ_ bits are cleared when the associated UART interrupt is cleared. UART interrupts are cleared by reading the UART
ISR register.
ADDRESS:
0x1E
MODE:
R/W
BIT
7
6
5
4
3
2
1
0
NAME
CLKtoRTS
—
ExtClock
PLLBypass
PLLEn
CrystalEn
IntOscEn
RESET
0
1
0
ADDRESS:
0x1F
MODE:
R
BIT
7
6
5
4
3
2
1
0
NAME
—
IRQ3
IRQ2
IRQ1
IRQ0
RESET
0
1
相關PDF資料
PDF描述
MAX3624AETJ+ 312.5 MHz, OTHER CLOCK GENERATOR, QCC32
MAX3638ETM+ 800 MHz, OTHER CLOCK GENERATOR, QCC48
MAX3679CTJ+ 625 MHz, OTHER CLOCK GENERATOR, QCC32
MAX7329AUP+ 8 I/O, PIA-GENERAL PURPOSE, PDSO20
MAX7329AAP+ 8 I/O, PIA-GENERAL PURPOSE, PDSO20
相關代理商/技術參數
參數描述
MAX14830ETM+ 功能描述:UART 接口集成電路 Quad Serial UART w/128-Word FIFOs RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
MAX14830ETM+T 功能描述:UART 接口集成電路 Quad Serial UART w/128-Word FIFOs RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
MAX14830EVKIT# 功能描述:界面開發工具 MAX14830 Eval Kit RoHS:否 制造商:Bourns 產品:Evaluation Boards 類型:RS-485 工具用于評估:ADM3485E 接口類型:RS-485 工作電源電壓:3.3 V
MAX14830EVKIT+ 制造商:Maxim Integrated Products 功能描述:QUAD UART EV-KIT WITH IO-LINK AND MULTIPROTOCOL - Boxed Product (Development Kits)
MAX1483C/D+ 功能描述:RS-485接口IC low-power transceivers for RS-485 and RS-422 communication RoHS:否 制造商:Texas Instruments 數據速率:250 Kbps 工作電源電壓:3.3 V 電源電流:750 uA 工作溫度范圍:- 40 C to + 125 C 安裝風格:SMD/SMT 封裝 / 箱體:SOIC-8 封裝:Tube
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*