參數資料
型號： MAX14830ETM+
廠商： MAXIM INTEGRATED PRODUCTS INC
元件分類： 微控制器/微處理器
英文描述： SERIAL COMM CONTROLLER, QCC48
封裝： 7 X 7 MM, ROHS COMPLIANT, TQFN-48
文件頁數： 26/68頁
文件大?。?/td> 2356K
代理商： MAX14830ETM+
MAX14830
Quad Serial UART with 128-Word FIFOs
and Internal Oscillator
32
ISR—Interrupt Status Register
The Interrupt Status Register provides an overview of all interrupts generated in the MAX14830. These interrupts are
cleared upon reading the ISR. When the MAX14830 is operated in polled mode, the ISR can be polled to establish
the UART’s status. In interrupt-driven mode, IRQ interrupts are enabled through the appropriate IRQEn bits. The ISR
contents give direct information on the cause for the interrupt or point to other registers that contain more detailed
information.
Bit 7: CTSInt
The CTSInt is set when a logic state transition occurs at the CTS_ input. This bit is cleared after ISR is read. The current
logic state of the CTS_ input can be read out through LSR[7]: CTS bit.
Bit 6: RFifoEmptyInt
The RFifoEmptyInt is set when the Receive FIFO is empty. This bit is cleared after ISR is read. Its meaning can be
inverted by setting the MODE2[3]: RxEmtyInt bit.
Bit 5: TFifoEmptyInt
The TFifoEmptyInt bit is set when the Transmit FIFO is empty. This bit is cleared once ISR is read.
Bit 4: TFifoTrigInt
The TFifoTrigInt bit is set when the number of characters in the Transmit FIFO is equal to or greater than the Transmit
FIFO trigger level defined in FIFOTrigLvl[3:0]. TFifoTrigInt is cleared when the Transmit FIFO level falls below the trigger
level or after the ISR is read. It can be used as a warning that the Transmit FIFO is nearing overflow.
Bit 3: RFifoTrigInt
The RFifoTrigInt bit is set when the Receive FIFO fill level reaches the Receive FIFO trigger level, as defined in
FIFOTrigLvl[7:4]. This can be used as an indication that the Receive FIFO is nearing overrun. It can also be used to
report that a known number of words are available that can be read out in one block. The meaning of RFifoTrigInt can
be inverted through MODE2[2]. RFifoTrigInt is cleared when ISR is read.
Bit 2: STSInt
The STSInt bit is set high when any bit in the STSInt register that is enabled through a STSIntEn bit is high. The STSInt
bit is cleared upon reading ISR.
Bit 1: SpCharInt
The SpCharInt bit is set high when a special character is received, a line BREAK is detected or an address character is
received in multidrop mode. The cause for the SpCharInt interrupt can be read from the SpclCharInt register, if enabled
through the SpclChrIntEn bits. The SpCharInt interrupt is cleared when the ISR is read.
Bit 0: LSRErrInt
The LSRErrInt bit is set high when any LSR bits, which are enabled through the LSRIntEn, are set. This bit is cleared
after the ISR is read.
ADDRESS:
0x02
MODE:
COR
BIT
7
6
5
4
3
2
1
0
NAME
CTSInt
RFifoEmptyInt
TFifoEmptyInt
TFifoTrigInt
RFifoTrigInt
STSInt
SpCharInt
LSRErrInt
RESET
0
1
0
相關PDF資料
PDF描述
MAX3624AETJ+ 312.5 MHz, OTHER CLOCK GENERATOR, QCC32
MAX3638ETM+ 800 MHz, OTHER CLOCK GENERATOR, QCC48
MAX3679CTJ+ 625 MHz, OTHER CLOCK GENERATOR, QCC32
MAX7329AUP+ 8 I/O, PIA-GENERAL PURPOSE, PDSO20
MAX7329AAP+ 8 I/O, PIA-GENERAL PURPOSE, PDSO20
相關代理商/技術參數
參數描述
MAX14830ETM+ 功能描述:UART 接口集成電路 Quad Serial UART w/128-Word FIFOs RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
MAX14830ETM+T 功能描述:UART 接口集成電路 Quad Serial UART w/128-Word FIFOs RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
MAX14830EVKIT# 功能描述:界面開發工具 MAX14830 Eval Kit RoHS:否 制造商:Bourns 產品:Evaluation Boards 類型:RS-485 工具用于評估:ADM3485E 接口類型:RS-485 工作電源電壓:3.3 V
MAX14830EVKIT+ 制造商:Maxim Integrated Products 功能描述:QUAD UART EV-KIT WITH IO-LINK AND MULTIPROTOCOL - Boxed Product (Development Kits)
MAX1483C/D+ 功能描述:RS-485接口IC low-power transceivers for RS-485 and RS-422 communication RoHS:否 制造商:Texas Instruments 數據速率:250 Kbps 工作電源電壓:3.3 V 電源電流:750 uA 工作溫度范圍:- 40 C to + 125 C 安裝風格:SMD/SMT 封裝 / 箱體:SOIC-8 封裝:Tube
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*