參數資料
型號： ISP1563BM,557
廠商： ST-ERICSSON
元件分類： 總線控制器
英文描述： UNIVERSAL SERIAL BUS CONTROLLER, PQFP100
封裝： 14 X 14 MM, 1.40 MM HEIGHT, PLASTIC, MS-026, SOT-420-1, LQFP-100
文件頁數： 54/102頁
文件大?。?/td> 466K
代理商： ISP1563BM,557
ISP1563_2
NXP B.V. 2007. All rights reserved.
Product data sheet
Rev. 02 — 15 March 2007
55 of 102
NXP Semiconductors
ISP1563
HS USB PCI Host Controller
[1]
The reserved bits should always be written with the reset value.
[2]
X is 1 for OHCI1 (2P) and OHCI2 (2P); X is 0 for OHCI1 (1P) and OHCI2 (1P).
[3]
X is 0 for OHCI1 (2P) and OHCI2 (2P); X is 1 for OHCI1 (1P) and OHCI2 (1P).
11.1.20 HcRhDescriptorB register
The HcRhDescriptorB register (see Table 81) is the second of two registers describing the
characteristics of the root hub. These elds are written during initialization to correspond
to the system implementation. Reset values are implementation-specic.
Bit
7
6
5
4
3
2
1
0
Symbol
NDP[7:0]
Reset
000000
Access
RRRRRRRR
Table 80.
HcRhDescriptorA - Host Controller Root Hub Descriptor A register bit description
Address: Content of the base address register + 48h
Bit
Symbol
Description
31 to 24
POTPGT
[7:0]
Power On To Power Good Time: This byte species the duration the HCD must wait before
accessing a powered-on port of the Root Hub. It is implementation-specic. The unit of time is 2 ms.
The duration is calculated as POTPGT
× 2ms.
23 to 13
reserved
-
12
NOCP
No Overcurrent Protection: This bit describes how the overcurrent status for root hub ports are
reported. When this bit is cleared, the OCPM bit species global or per-port reporting.
0 — Overcurrent status is collectively reported for all downstream ports.
1 — No overcurrent protection supported.
11
OCPM
Overcurrent Protection Mode: This bit describes how the overcurrent status for root hub ports are
reported. At reset, this elds reects the same mode as Power Switching Mode. This eld is valid only
if the NOCP bit is cleared.
0 — Overcurrent status is collectively reported for all downstream ports.
1 — Overcurrent status is reported on a per-port basis.
10
DT
Device Type: This bit species that the root hub is not a compound device. The root hub is not
permitted to be a compound device. This eld must always read logic 0.
9
NPS
No Power Switching: This bit is used to specify whether power switching is supported or ports are
always powered. It is implementation-specic. When this bit is cleared, the PSM bit species global or
per-port switching.
0 — Ports are power switched.
1 — Ports are always powered on when the Host Controller is powered on.
8
PSM
Power Switching Mode: This bit is used to specify how the power switching of root hub ports is
controlled. It is implementation-specic. This eld is valid only if the NPS bit is cleared.
0 — All ports are powered at the same time.
1 — Each port is individually powered. This mode allows port power to be controlled by either the
global switch or per-port switching. If the PPCM (Port Power Control Mask) bit is set, the port
responds only to port power commands (Set/Clear Port Power). If the port mask is cleared, then the
port is controlled only by the global power switch (Set/Clear Global Power).
7 to 0
NDP[7:0] Number Downstream Ports: These bits specify the number of downstream ports supported by the
root hub. It is implementation-specic. The minimum number of ports is 1. The maximum number of
ports supported by OHCI is 15.
相關PDF資料
PDF描述
ISP1564ET,551 PCI BUS CONTROLLER, PBGA100
ISP1582BS,557 UNIVERSAL SERIAL BUS CONTROLLER, PQCC56
ISP1583ET1,118 UNIVERSAL SERIAL BUS CONTROLLER, PBGA64
ISP1583BS,551 UNIVERSAL SERIAL BUS CONTROLLER, PQCC64
ISP1583ET2 UNIVERSAL SERIAL BUS CONTROLLER, PBGA64
相關代理商/技術參數
參數描述
ISP1563BMGA 功能描述:IC USB HOST CTRL HI-SPD 128LQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 專用 系列:- 標準包裝:3,000 系列:- 應用:PDA，便攜式音頻/視頻，智能電話 接口:I²C，2 線串口 電源電壓:1.65 V ~ 3.6 V 封裝/外殼:24-WQFN 裸露焊盤 供應商設備封裝:24-QFN 裸露焊盤（4x4） 包裝:帶卷 (TR) 安裝類型:表面貼裝 產品目錄頁面:1015 (CN2011-ZH PDF) 其它名稱:296-25223-2
ISP1563BMGE 功能描述:IC USB PCI HOST CTRLR 128-LQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 專用 系列:- 標準包裝:3,000 系列:- 應用:PDA，便攜式音頻/視頻，智能電話 接口:I²C，2 線串口 電源電壓:1.65 V ~ 3.6 V 封裝/外殼:24-WQFN 裸露焊盤 供應商設備封裝:24-QFN 裸露焊盤（4x4） 包裝:帶卷 (TR) 安裝類型:表面貼裝 產品目錄頁面:1015 (CN2011-ZH PDF) 其它名稱:296-25223-2
ISP1563BM-T 功能描述:USB 接口集成電路 USB 2.0 4PORT PCI HOST CONTROL RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
ISP1563BMUM 功能描述:IC USB HOST CTRL HI-SPD 128LQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 專用 系列:- 標準包裝:3,000 系列:- 應用:PDA，便攜式音頻/視頻，智能電話 接口:I²C，2 線串口 電源電壓:1.65 V ~ 3.6 V 封裝/外殼:24-WQFN 裸露焊盤 供應商設備封裝:24-QFN 裸露焊盤（4x4） 包裝:帶卷 (TR) 安裝類型:表面貼裝 產品目錄頁面:1015 (CN2011-ZH PDF) 其它名稱:296-25223-2
ISP1564 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Hi-Speed USB PCI host controller
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*