參數資料
型號: IDT82V3202NLG
廠商: IDT, Integrated Device Technology Inc
文件頁數: 44/117頁
文件大?。?/td> 0K
描述: IC PLL WAN EBU SGL 68-VFQFPN
標準包裝: 21
類型: 時鐘/頻率發生器,多路復用器
PLL:
主要目的: 以太網,SONET/SDH,Stratum
輸入: CMOS
輸出: CMOS,LVDS,PECL
電路數: 1
比率 - 輸入:輸出: 2:2
差分 - 輸入:輸出: 無/是
頻率 - 最大: 622.08MHz
電源電壓: 3 V ~ 3.6 V
工作溫度: -40°C ~ 85°C
安裝類型: 表面貼裝
封裝/外殼: 68-VFQFN 裸露焊盤
供應商設備封裝: 68-VFQFPN(10x10)
包裝: 托盤
其它名稱: 82V3202NLG
IDT82V3202
EBU WAN PLL
Functional Description
32
September 11, 2009
phase locked to any input clock. The frequency offset acquiring method
is selected by the MAN_HOLDOVER bit, the AUTO_AVG bit and the
FAST_AVG bit, as shown in Table 17:
3.10.1.5.1 Automatic Instantaneous
By this method, the T0 DPLL freezes at the operating frequency
when it enters Holdover mode. The accuracy is 4.4X10-8 ppm.
3.10.1.5.2 Automatic Slow Averaged
By this method, an internal IIR (Infinite Impulse Response) filter is
employed to get the frequency offset. The IIR filter gives a 3 dB attenua-
tion point corresponding to a period of 110 minutes. The accuracy is
1.1X10-5 ppm.
3.10.1.5.3 Automatic Fast Averaged
By this method, an internal IIR (Infinite Impulse Response) filter is
employed to get the frequency offset. The IIR filter gives a 3 dB attenua-
tion point corresponding to a period of 8 minutes. The accuracy is
1.1X10-5 ppm.
3.10.1.5.4 Manual
By this method, the frequency offset is set by the
T0_HOLDOVER_FREQ[23:0] bits. The accuracy is 1.1X10-5 ppm.
The frequency offset of the T0 DPLL output is indicated by the
CURRENT_DPLL_FREQ[23:0] bits.
The device provides a reference for the value to be written to the
T0_HOLDOVER_FREQ[23:0] bits. The value to be written can refer to
the value read from the CURRENT_DPLL_FREQ[23:0] bits or the
T0_HOLDOVER_FREQ[23:0] bits (refer to Chapter 3.10.1.5.5 Holdover
Frequency Offset Read); or then be processed by external software fil-
tering.
3.10.1.5.5 Holdover Frequency Offset Read
The offset value, which is acquired by Automatic Slow Averaged,
Automatic Fast Averaged and is set by related register bits, can be read
from the T0_HOLDOVER_FREQ[23:0] bits by setting the READ_AVG
bit and the FAST_AVG bit, as shown in Table 18.
The frequency offset in ppm is calculated as follows:
Holdover Frequency Offset (ppm) = T0_HOLDOVER_FREQ[23:0] X
0.000011
3.10.1.6
Pre-Locked2 Mode
In Pre-Locked2 mode, the T0 DPLL output attempts to track the
selected input clock.
The Pre-Locked2 mode is a secondary, temporary mode.
Table 17: Frequency Offset Control in Holdover Mode
MAN_HOLDOVER
AUTO_AVG
FAST_AVG
Frequency Offset Acquiring Method
0
don’t-care
Automatic Instantaneous
1
0
Automatic Slow Averaged
1
Automatic Fast Averaged
1
don’t-care
Manual
Table 18: Holdover Frequency Offset Read
READ_AVG FAST_AVG
Offset Value Read from
T0_HOLDOVER_FREQ[23:0]
0
don’t-care The value is equal to the one written to.
1
0
The value is acquired by Automatic Slow Averaged
method, not equal to the one written to.
1
The value is acquired by Automatic Fast Averaged
method, not equal to the one written to.
相關PDF資料
PDF描述
IDT82V3255TFG IC PLL WAN SMC STRATUM 3 64-TQFP
IDT82V3280APFG IC PLL WAN SE STRATUM 2 100TQFP
IDT82V3285AEQG IC PLL WAN SE STRATUM 100TQFP
IDT82V3285EQG IC PLL WAN SE STRATUM 100TQFP
IDT82V3288BCG IC PLL WAN 3E STRATUM 2 208CABGA
相關代理商/技術參數
參數描述
IDT82V3202NLG8 功能描述:IC PLL WAN EBU SGL 68-VFQFPN RoHS:是 類別:集成電路 (IC) >> 時鐘/計時 - 專用 系列:- 標準包裝:1,500 系列:- 類型:時鐘緩沖器/驅動器 PLL:是 主要目的:- 輸入:- 輸出:- 電路數:- 比率 - 輸入:輸出:- 差分 - 輸入:輸出:- 頻率 - 最大:- 電源電壓:3.3V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:28-SSOP(0.209",5.30mm 寬) 供應商設備封裝:28-SSOP 包裝:帶卷 (TR) 其它名稱:93786AFT
IDT82V3202NLGBLANK 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:EBU WAN PLL
IDT82V3255 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:WAN PLL
IDT82V3255_08 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:WAN PLL
IDT82V3255DK 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:WAN PLL