參數資料
型號： DS2196LN
元件分類： 通信及網絡
英文描述： Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0
中文描述： Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0
文件頁數： 50/157頁
文件大?。?/td> 734K
代理商： DS2196LN
DS2196
50 of 157
CCR7B: COMMON CONTROL REGISTER 7 FRAMER B (Address = AA Hex)
(MSB)
–
(LSB)
UOP0
BELB
AIS13-24
AIS1-12
UOP3
UOP2
UOP1
SYMBOL
POSITION
NAME AND DESCRIPTION
–
CCR7B.7
CCR7B.6
Not Assigned.
Should be set to 0 when written to.
Back End Loopback.
0 = loopback disabled
1 = loopback enabled
Channels 13 – 24 AIS Enable
0 = do not transmit AIS in channels 13 – 24
1 = transmit AIS in channels 13 - 24
Channels 1 – 12 AIS Enable
0 = do not transmit AIS in channels 1 – 12
1 = transmit AIS in channels 1 - 12
User Defined Output Pin 3.
0 = logic 0 level at pin
1 = logic 1 level at pin
User Defined Output Pin 2.
0 = logic 0 level at pin
1 = logic 1 level at pin
User Defined Output Pin 1.
0 = logic 0 level at pin
1 = logic 1 level at pin
User Defined Output Pin 0.
0 = logic 0 level at pin
1 = logic 1 level at pin
BELB
AIS13-24
CCR7B.5
AIS1-12
CCR7B.4
UOP3
CCR7B.3
UOP2
CCR7B.2
UOP1
CCR7B.1
UOP0
CCR7B.0
Remote Loopback
When CCR7A.6 is set to a 1, the 2196 will be forced into Remote Loopback (RLB). In this loopback,
data input via the RPOSI and RNEGI pins will be transmitted back to the TPOSO and TNEGO pins.
Data will continue to pass through the receive side of Framer A as it would normally and the data from
the transmit side of Formatter A will be ignored. Please see Figure 1–1 for more details.
Back End Loopback
When CCR7B.6 is set to a 1, the 2196 will be forced into Back End Loopback (BELB). In this loopback,
data input via the RPOSIB and RNEGIB pins will be transmitted back to the TPOSOB and TNEGOB
pins. Data will continue to pass through the receive side of Framer B as it would normally and the data
from the transmit side of Formatter B will be ignored. Please see Figure 1–1 for more details.
Power–Up Sequence
On power–up, after the supplies are stable, the DS2196 should be configured for operation by writing to
all of the internal registers (this includes setting the Test Registers to 00Hex) since the contents of the
internal registers cannot be predicted on power–up.
相關PDF資料
PDF描述
DS21Q43AT Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0
DS21Q43ATN Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0
DS21Q44 Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0
DS21Q44T Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0
DS21Q44TN MICROSWITCH, SPDT, SIM ROLLER LEVER; Current, contact AC:5A; Force, operating:91.75gf; Travel, pre:16.0mm; Centres, fixing LxW:22.2mm; Temp, op. max:120(degree C); Temp, op. min:-40(degree C); Length / Height, external:9.25mm; Width, RoHS Compliant: Yes
相關代理商/技術參數
參數描述
DS2196LN+ 功能描述:網絡控制器與處理器 IC T1 Dual Framer LIU RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS219T 功能描述:烙鐵 DESOLDERING HEAD RoHS:否 制造商:Weller 產品:Soldering Stations 類型:Digital, Iron, Stand, Cleaner 瓦特:50 W 最大溫度:+ 850 F 電纜類型:US Cord Included
DS21E352 功能描述:網絡控制器與處理器 IC RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS21E352N 功能描述:網絡控制器與處理器 IC RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS21E354 功能描述:網絡控制器與處理器 IC RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*