參數資料
型號: DS2196LN+
廠商: Maxim Integrated Products
文件頁數: 151/157頁
文件大?。?/td> 0K
描述: IC FRAMER DUAL T1 LIU 100-LQFP
產品培訓模塊: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
標準包裝: 90
控制器類型: T1 調幀器
接口: 并行/串行
電源電壓: 3.135 V ~ 3.465 V
電流 - 電源: 85mA
工作溫度: -40°C ~ 85°C
安裝類型: 表面貼裝
封裝/外殼: 100-LQFP
供應商設備封裝: 100-LQFP(14x14)
包裝: 托盤
DS2196
93 of 157
BAWC: BERT Alternating Word Count Rate. (Address = 44 Hex)
(MSB)
(LSB)
ALTCNT7 ALTCNT6 ALTCNT5 ALTCNT4 ALTCNT3 ALTCNT2 ALTCNT1 ALTCNT0
SYMBOL
POSITION
NAME AND DESCRIPTION
ALTCNT7
BAWC.7
Alternating Word Count Rate Bit 7. (MSB)
ALTCNT6
BAWC.6
Alternating Word Count Rate Bit 6 .
ALTCNT5
BAWC.5
Alternating Word Count Rate Bit 5.
ALTCNT4
BAWC.4
Alternating Word Count Rate Bit 4.
ALTCNT3
BAWC.3
Alternating Word Count Rate Bit 3.
ALTCNT2
BAWC.2
Alternating Word Count Rate Bit 2.
ALTCNT1
BAWC.1
Alternating Word Count Rate Bit 1.
ALTCNT0
BAWC.0
Alternating Word Count Rate Bit 0. (LSB)
When the BERT is programmed in the alternating word mode, the words will repeat for the count loaded
into this register then flip to the other word and again repeat for the number of times loaded into this
register.
BRP0: BERT Repetitive Pattern Set Register 0 (Address = 45 Hex)
BRP1: BERT Repetitive Pattern Set Register 1 (Address = 46 Hex)
BRP2: BERT Repetitive Pattern Set Register 2 (Address = 47 Hex)
BRP3: BERT Repetitive Pattern Set Register 3 (Address = 48 Hex)
(MSB)
(LSB)
RPAT7
RPAT6
RPAT5
RPAT4
RPAT3
RPAT2
RPAT1
RPAT0
BRP0
RPAT15
RPAT14
RPAT13
RPAT12
RPAT11
RPAT10
RPAT9
RPAT8
BRP1
RPAT23
RPAT22
RPAT21
RPAT20
RPAT19
RPAT18
RPAT17
RPAT16 BRP2
RPAT31
RPAT30
RPAT29
RPAT28
RPAT27
RPAT26
RPAT25
RPAT24 BRP3
SYMBOL
POSITION
NAME AND DESCRIPTION
RPAT31
BERTRP3.7
MSB of the 32–bit Repetitive Pattern Set
RPAT0
BERTRP0.0
LSB of the 32–bit Repetitive Pattern Set
BERT Repetitive Pattern Set. These registers must be properly loaded for the BERT to properly
generate and synchronize to a repetitive pattern, a pseudorandom pattern, alternating word pattern, or a
Daly pattern. For a repetitive pattern that is less than 32 bits, then the pattern should be repeated so that
all 32 bits are used to describe the pattern. For example if the pattern was the repeating 5-bit pattern
…01101… (where the right most bit is the one sent first and received first) then BRP0 should be loaded
with ADh, BRP1 with B5h, BRP2 with D6h,
and BRP3 should be loaded with 5Ah.
For a
pseudorandom pattern, all four registers should be loaded with all 1’s (i.e. xFF). For an alternating word
pattern, one word should be placed into BRP0 and BRP1 and the other word should be placed into BRP2
and BRP3. For example, if the DDS stress pattern "7E" is to be described, the user would place 00h in
BRP0, 00h in BRP1, 7Eh in BRP2, and 7Eh in BRP3 and the alternating word counter would be set to 50
(decimal) to allow 100 bytes of 00h followed by 100 bytes of 7Eh to be sent and received.
相關PDF資料
PDF描述
DS21FF42 IC FRAMER T1 4X4 16CH 300-BGA
DS21FF44 IC FRAMER E1 4X4 16CH 300-BGA
DS21FT44N+ IC FRAMER 4X4 16CH 300-BGA
DS21Q352B IC TXRX QUAD T1/E1 3.3V 256-BGA
DS21Q41BT IC FRAMER T1 QUAD 128-TQFP
相關代理商/技術參數
參數描述
DS2196LN+ 功能描述:網絡控制器與處理器 IC T1 Dual Framer LIU RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流(最大值):595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS219T 功能描述:烙鐵 DESOLDERING HEAD RoHS:否 制造商:Weller 產品:Soldering Stations 類型:Digital, Iron, Stand, Cleaner 瓦特:50 W 最大溫度:+ 850 F 電纜類型:US Cord Included
DS21E352 功能描述:網絡控制器與處理器 IC RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流(最大值):595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS21E352N 功能描述:網絡控制器與處理器 IC RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流(最大值):595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS21E354 功能描述:網絡控制器與處理器 IC RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流(最大值):595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray