參數資料
型號： AD9518-0A/PCBZ
廠商： Analog Devices Inc
文件頁數： 3/64頁
文件大小： 0K
描述： BOARD EVALUATION FOR AD9518-0A
設計資源： AD9518 Eval Brd Schematics
AD9518 Gerber Files
AD9518-0 BOM
標準包裝： 1
主要目的： 計時，時鐘發生器
嵌入式： 否
已用 IC / 零件： AD9518-0A
主要屬性： 2 輸入，6 輸出，2.8GHz VCO
次要屬性： LVPECL 輸出邏輯
已供物品： 板
Data Sheet
AD9518-0
Rev. C | Page 11 of 64
LD, STATUS, AND REFMON PINS
Table 15.
Parameter
Min
Typ
Max
Unit
Test Conditions/Comments
OUTPUT CHARACTERISTICS
When selected as a digital output (CMOS); there are other
modes in which these pins are not CMOS digital outputs;
see Table 44, Register 0x017, Register 0x01A, and
Register 0x01B
Output Voltage High (VOH)
2.7
V
Output Voltage Low (VOL)
0.4
V
MAXIMUM TOGGLE RATE
100
MHz
Applies when mux is set to any divider or counter output,
or PFD up/down pulse; also applies in analog lock detect
mode; usually debug mode only; beware that spurs may
couple to output when any of these pins are toggling
ANALOG LOCK DETECT
Capacitance
3
pF
On-chip capacitance; used to calculate RC time constant
for analog lock detect readback; use a pull-up resistor
REF1, REF2, AND VCO FREQUENCY STATUS MONITOR
Normal Range
1.02
MHz
Frequency above which the monitor always indicates the
presence of the reference
Extended Range (REF1 and REF2 Only)
8
kHz
Frequency above which the monitor always indicates the
presence of the reference
LD PIN COMPARATOR
Trip Point
1.6
V
Hysteresis
260
mV
POWER DISSIPATION
Table 16.
Parameter
Min
Typ
Max
Unit
Test Conditions/Comments
POWER DISSIPATION, CHIP
Power-On Default
0.76
1.0
W
No clock; no programming; default register values;
does not include power dissipated in external resistors
Full Operation
1.1
1.7
W
PLL on; internal VCO = 2750 MHz; VCO divider = 2;
all channel dividers on; six LVPECL outputs at 687.5 MHz;
does not include power dissipated in external resistors
PD Power-Down
75
185
mW
PD pin pulled low; does not include power dissipated
in terminations
PD Power-Down, Maximum Sleep
31
mW
PD pin pulled low; PLL power-down, Register 0x010[1:0] =
01b; SYNC power-down, Register 0x230[2] = 1b; REF for
distribution power-down, Register 0x230[1] = 1b
VCP Supply
4
4.8
mW
PLL operating; typical closed-loop configuration
POWER DELTAS, INDIVIDUAL FUNCTIONS
Power delta when a function is enabled/disabled
VCO Divider
30
mW
VCO divider bypassed
REFIN (Differential)
20
mW
All references off to differential reference enabled
REF1, REF2 (Single-Ended)
4
mW
All references off to REF1 or REF2 enabled; differential
reference not enabled
VCO
70
mW
CLK input selected to VCO selected
PLL
75
mW
PLL off to PLL on, normal operation; no reference
enabled
Channel Divider
30
mW
Divider bypassed to divide-by-2 to divide-by-32
LVPECL Channel (Divider Plus Output Driver)
160
mW
No LVPECL output on to one LVPECL output on,
independent of frequency
LVPECL Driver
90
mW
Second LVPECL output turned on, same channel
相關PDF資料
PDF描述
FCBP110LD1L10S KIT 10M LASERWIRE SFP+
VE-JTX-EZ-S CONVERTER MOD DC/DC 5.2V 25W
H3CWH-2036M IDC CABLE - HKC20H/AE20M/HPL20H
AD9518-3A/PCBZ BOARD EVALUATION FOR AD9518-3A
AD9518-4A/PCBZ BOARD EVALUATION FOR AD9518-4A
相關代理商/技術參數
參數描述
AD9518-0BCPZ 制造商:Analog Devices 功能描述:Clock Generator 48-Pin LFCSP EP Tray
AD9518-0BCPZ-REEL7 制造商:Analog Devices 功能描述:
AD9518-1 制造商:AD 制造商全稱:Analog Devices 功能描述:6-Output Clock Generator with Integrated 2.5 GHz VCO
AD9518-1/PCBZ 制造商:Analog Devices 功能描述:6-Output Clock Generator with 2.8GHz
AD9518-1A/PCBZ 功能描述:BOARD EVALUATION FOR AD9518-1A RoHS:是 類別:編程器，開發系統 >> 評估演示板和套件 系列:- 標準包裝:1 系列:PSoC® 主要目的:電源管理，熱管理 嵌入式:- 已用 IC / 零件:- 主要屬性:- 次要屬性:- 已供物品:板，CD，電源
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*