
28229-DSH-001-B
Mindspeed Technologies
A
-11
CX28224/5/9 Data Sheet
IMA Version 1.1 PICS Proforma
IIO.13
Does the implementation use “Inhibited”, “Failed”, “Fault” or “Mis-
connected” as a reason when reporting the Unusable state?
O(O-14)
Yes X No X
Partial Usage
IIO.14
Does the implementation re-evaluate the TX and Rx LSMs state
upon each incoming ICP cell with new state indication?
M(R-81)
Yes X No__
IIO.15
Does the implementation allow the valid combinations of Tx and
Rx LSM states and disallow the invalid combinations when
running in the Symmetrical Configuration and Operation mode?
M(R-82)
Yes X No__
IIO.16
Does the implementation allow the valid combinations of Tx and
Rx LSM states and disallow the invalid combinations when
running in the Symmetrical Configuration and Asymmetrical
Operation mode?
M(R-82)
Yes X No__
IIO.17
Does the implementation allow all combinations of Tx and Rx LSM
states when running in the Asymmetrical Configuration and
Operation mode?
M(R-82)
Yes X No__
IIO.18
Does the implementation report any GSM states, with the
exception of the Not Configured state, to the FE group using the
corresponding value defined in the “Group Status and Control”
field?
M(R-83)
Yes X No__
IIO.19
Does the implementation always send over each link the same
value in the “Group Status and Control” field for at least 2
consecutive IMA frames?
M(R-84)
Yes X No__
IIO.20
Does the implementation validate the Rx OAM Label, Rx M, and Rx
IMA ID over at least one link before moving into the Start-up-Ack
state?
M(R-85)
Yes X No__
IIO.21
Does the implementation use the validated Rx OAM Label, Rx M,
and Rx IMA ID to achieve IMA frame synchronization as defined in
Section 11 on page 68?
M(R-86)
Yes X No__
IIO.22
Does the implementation ensure that at least PTx links in the
transmit direction and PRx links in the received direction can be
moved into the Active state before moving the GSM into the
Operational state?
M(R-87)
Yes X No__
IIO.23
Does the implementation ensure that PTx is greater than zero?
M
(R-88)
Yes X No__
IIO.24
Does the implementation ensure that PRx is greater than zero?
M
(R-88)
Yes X No__
IIO.25
Does the implementation ensure that PTx and PRx are equal when
the configured in the Symmetrical Configuration and Operation
mode?
M(R-89)
Yes X No__
IIO.26
Does the implementation allow configuration of the value of PTx?
O
(O-15)
Yes X No__
IIO.27
Does the implementation allow configuration of the value of PRx?
O
(O-15)
Yes X No__
IIO.28
Does the implementation report the Config-Aborted state for at
least one second when the configuration requested by the FE is
unacceptable?
M(R-90)
Yes X No__
IIO.29
Does the implementation support the GSM state transitions as
defined in 13 on page 60?
M(R-91)
Yes X No__
Table A-6. IMA Interface Operation (IIO) Functions (2 of 4)
Item
Protocol feature
Cond. for
Status
Pred.
Ref.
Support