
2–21
2.11.6
The MUXOUT bit indicates to external circuitry that the device is running in the VGA pass-through mode.
This bit does not affect the operation of the device (see Section 2.10).
MUXOUT (Bit 7)
0: MUXOUT is low (default in VGA pass-through mode)
1: MUXOUT is high
2.12 Test Register
There are three test functions provided in the TLC34076M, and they are all controlled and monitored through
the test register. They are data flow check, DAC analog test, and screen integrity test.
The test register has two ports: one for a control word accessed by writing to the register location, and one
for the data word accessed by reading from the register location. Depending on the channel written in the
control word, the data read presents the information for that channel.
The control word is three bits long and occupies D<2:0>. It specifies which of the eight channels to inspect.
The following table and state machine diagrams show how each channel is addressed:
Table 2–11. Test-Mode Selection
D1
D0
0
0
Color-palette red value
0
1
Color-palette green value
1
0
Color-palette blue value
1
1
Identification code
0
0
Ones-accumulation red value
0
1
Ones-accumulation green value
1
0
Ones-accumulation blue value
1
1
Analog test
D2
0
0
0
0
1
1
1
1
CHANNEL
011
010
001
000
110
101
100
111
ID code
RD
RD
RD
RD
RESET
Blue
Green
Red
RD
RD
RD
Red
Blue
Green
RD
DATA FLOW CHECK
DAC ANALOG TEST
SCREEN INTEGRITY TEST
Figure 2–11. Test-Register Control-Word State Diagrams