參數資料
型號: SII3114_07
廠商: Silicon Image, Inc.
英文描述: PCI to Serial ATA Controller
中文描述: PCI到Serial ATA控制器
文件頁數: 65/127頁
文件大?。?/td> 598K
代理商: SII3114_07
SiI
3114 PCI to Serial ATA Controller
Data Sheet
Silicon Image, Inc.
2007 Silicon Image, Inc.
57
SiI
-DS-0103-D
FIFO Valid Byte Count and Control – Channel
X
Address Offset: 40
H
/ 44
H
/ 240
H
/ 244
H
Access Type: Read/Write
Reset Value: 0x0000_0000
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
Reserved
FIFO Valid Byte Count
Reserved
FIFO Wr
Req Ctrl
Reserved
FIFO Rd
Req Ctrl
This register defines the FIFO valid byte count register and PCI bus request control for Channel
X
in the
SiI
3114.
The register bits are defined below.
The FIFO Write Request Control and FIFO Read Request Control fields in these registers provide threshold
settings for establishing when PCI requests are made to the Arbiter. The Arbiter arbitrates among the four
requests using fixed priority with masking. The fixed priority is, from highest to lowest: channel 0; channel 1;
channel 2; and channel 3. If multiple requests are present, the arbiter grants PCI bus access to the highest
priority channel that is not masked. That channel’s request is then masked as long as any unmasked requests are
present.
Bit [31:25]
: Reserved (R). This bit field is reserved and returns zeros on a read.
Bit [24:16]
: FIFO Valid Byte Count (R). This bit field provides the valid byte count for the data FIFO for
Channel
X
. A value of 000
H
indicates empty, while a value of 100
H
indicates a full FIFO with 256 bytes.
Bit [15:11]
: Reserved (R). This bit field is reserved and returns zeros on a read.
Bit [10:08]
: FIFO Wr Req Ctrl (R/W) – FIFO Write Request Control. This bit field defines the FIFO
threshold to assign priority when requesting a PCI bus write operation. A value of 00
H
indicates that write
request priority is set whenever the FIFO contains greater than 32 bytes, while a value of 07
H
indicates that
write request priority is set whenever the FIFO contains greater than 7x32 bytes (=224 bytes). This bit field
is useful when multiple DMA channels are competing for the PCI bus.
Bit [07:03]
: Reserved (R). This bit field is reserved and returns zeros on a read.
Bit [02:00]
: FIFO Rd Req Ctrl (R/W) – FIFO Read Request Control. This bit field defines the FIFO
threshold to assign priority when requesting a PCI bus read operation. A value of 00
H
indicates that read
request priority is set whenever the FIFO has greater than 32 bytes available space, while a value of 07
H
indicates that read request priority is set whenever the FIFO has greater than 7x32 bytes (=224 bytes)
available space. This bit field is useful when multiple DMA channels are competing for accessing the PCI
bus.
System Configuration Status – Command
Address Offset: 48
H
Access Type: Read/Write
Reset Value: 0x0000_0000
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
Reserved
C
C
C
C
Reserved
M
Reserved
C
C
F
F
C
C
F
F
R
A
P
This register defines the system configuration status and command register for the
SiI
3114. The register bits are
defined below.
Bit [31:26]
: Reserved (R). This bit field is reserved and returns zeros on a read.
Bit [25]
: Chnl3 Int Block (R/W) – Channel3 Interrupt Block. This bit is set to block interrupts from Channel
3.
相關PDF資料
PDF描述
SiI3114CT176 PCI to Serial ATA Controller
SiI3114CTU PCI to Serial ATA Controller
SII3124A PCI-X to Serial ATA Controller
SiI3124ACBHU PCI-X to Serial ATA Controller
SII3132 PCI Express to 2-Port Serial ATA II Host Controller
相關代理商/技術參數
參數描述
SII3114CT176 制造商:SILICONIMAGE 制造商全稱:SILICONIMAGE 功能描述:PCI to Serial ATA Controller
SII3114CTU 制造商:Silicon Image Inc 功能描述:PCI to Serial ATA Controller 176-Pin TQFP 制造商:SILICON 功能描述:
SII3124A 制造商:SILICONIMAGE 制造商全稱:SILICONIMAGE 功能描述:PCI-X to Serial ATA Controller
SII3124ACBHU 制造商:SILICONIMAGE 制造商全稱:SILICONIMAGE 功能描述:PCI-X to Serial ATA Controller
SII3132 制造商:SILICONIMAGE 制造商全稱:SILICONIMAGE 功能描述:PCI Express to 2-Port Serial ATA II Host Controller