參數資料
型號: S6D0114
廠商: SAMSUNG SEMICONDUCTOR CO. LTD.
英文描述: 132 RGB X 176 DOT 1-CHIP DRIVER IC WITH INTERNAL GRAM FOR 262,144 Colors TFT-LCD
中文描述: 132的RGB × 176交通部1 -芯片驅動器集成電路的26萬色TFT內部革蘭氏液晶顯示器
文件頁數: 96/143頁
文件大?。?/td> 1919K
代理商: S6D0114
132-RGB X 176-DOT 1-CHIP DRIVER IC FOR 262,144-COLOR TFT-LCD DISPLAY
S6D0114
Preliminary
96
When high-speed write mode is used, note the following.
1. The logical and compare operations cannot be used.
2. Data is written to RAM each four words. When an address is set, the lower two bits in the address must be set to
the following values.
*When ID0=0, the lower two bits in the address must be set to 11 and be written to RAM.
*When ID0=1, the lower two bits in the address must be set to 00 and be written to RAM.
3. Data is written to RAM each four words. If less than four words of data is written to RAM, the last data will not be
written to RAM.
4. When the index register and RAM data write (R22h) have been selected, the data is always written first. RAM
cannot be written to and read from at the same time. HWM must be set to 0 while RAM is being read.
5. High-speed and normal RAM write operations cannot be executed at the same time. The mode must be switched
and the address must then be set.
6. When high-speed RAM write is used with a window address-range specified, dummy write operation may be
required to suit the window address range-specification. Refer to the High-Speed RAM Write in the Window Address
section.
Table 31. Comparison between Normal and High-speed RAM Write Operations
Normal RAM Write
(HWM=0)
Logical operation function
Can be used
Compare operation function
Can be used
BGR function (RGB swap)
Can be used
Write mask function
Can be used
High-speed RAM Write
(HWM=1)
Cannot be used
Cannot be used
Can be used
Can be used
ID0 bit=0: Set the lower two bits to 11
ID0 bit=1: Set the lower two bits to 00
Cannot be used
Dummy write operations may have to
be inserted according to a window
address-range specification
The horizontal range(HAS/HSE):
More than four words
The number of horizontal writing:
4N(N 2)
Can be used
AM=0
RAM address set
Can be specified by word
RAM read
Can be read by word
RAM write
Can be written by word
Window address
Can be set by word
External display interface
AM setting
NOTE:
1 word = 2 byte.
Can be used
AM=1/0
相關PDF資料
PDF描述
S70WS512N00BFWAA2 Same-Die Stacked Multi-Chip Product (MCP) 512 Megabit (32M x 16 bit) CMOS 1.8 Volt-only Simultaneous Read/Write, Burst-mode Flash Memory
S70WS512N00BAWAA2 Same-Die Stacked Multi-Chip Product (MCP) 512 Megabit (32M x 16 bit) CMOS 1.8 Volt-only Simultaneous Read/Write, Burst-mode Flash Memory
S70WS512N00BAWAA3 Same-Die Stacked Multi-Chip Product (MCP) 512 Megabit (32M x 16 bit) CMOS 1.8 Volt-only Simultaneous Read/Write, Burst-mode Flash Memory
S70WS512N00BAWAB0 Same-Die Stacked Multi-Chip Product (MCP) 512 Megabit (32M x 16 bit) CMOS 1.8 Volt-only Simultaneous Read/Write, Burst-mode Flash Memory
S70WS512N00BAWAB2 Same-Die Stacked Multi-Chip Product (MCP) 512 Megabit (32M x 16 bit) CMOS 1.8 Volt-only Simultaneous Read/Write, Burst-mode Flash Memory
相關代理商/技術參數
參數描述
S6D04D2X03-BJD4 制造商:Samsung Semiconductor 功能描述:Mobile TFT driver, COG, wqVGA, 16M colors
S6D04H0A01-B0C1 制造商:Samsung Semiconductor 功能描述:TFT QVGA, 240x320, 2" TRAY, 250um
S6D05A1X31-BJD1 制造商:Samsung Semiconductor 功能描述:Mobile TFT driver, COG, HVGA, 16M Colors
S6D05A3X04-BJD1 制造商:Samsung Semiconductor 功能描述:Mobile TFT driver, COG, HVGA, 16M Colors,90Hv
S6D7AA0X04-B0E5 制造商:Samsung Semiconductor 功能描述:Resolution HD720 , Color 16M , Ramless IC , ASG type