參數資料
型號: NSAM265SRA
廠商: National Semiconductor Corporation
英文描述: CompactSPEECH Digital Speech Processors
中文描述: CompactSPEECH數字語音處理器
文件頁數: 4/58頁
文件大?。?/td> 712K
代理商: NSAM265SRA
1.0 Theory of Operation
1.1 OVERVIEW
The CompactSPEECH is a digital speech processor, which
provides Digital Answering Machine (DAM) functionality to
embedded systems, such as fax machines or stand-alone
answering machines.
The CompactSPEECH processor is based on a powerful
16-bit RISC CPU with Digital Signal Processing (DSP) mod-
ule. However, since the CompactSPEECH firmware is
masked in the internal ROM, it requires neither 16-bit nor
DSP programming.
The CompactSPEECH processor is designed to operate as
a slave peripheral that is controlled by an external micro-
controller via a simple, MICROWIRE based, serial link. The
microcontroller is responsible for system-level control (e.g.,
buttons, display, ring detection) while the CompactSPEECH
is responsible for speech and tone operations such as re-
cording, playback, tone detection and speech synthesis.
The NSAM265SR CompactSPEECH supports DRAM and
Audio grade DRAM (ARAM) as a storage device. ARAMs
are cheaper than DRAMs, which reduces the total system
cost.
The NSAM265SR CompactSPEECH has an on-chip DRAM
controller, which reduces the chip count for complete DAM
functionality to three (the CompactSPEECH. ARAM and a
codec). The CompactSPEECH supports various ARAM con-
figurations, and automatically recognizes the actual configu-
ration.
The NSAM265SF CompactSPEECH supports FLASH and
Audio grade FLASH (AFLASH) as a storage device. A DAM
design, which incorporates FLASH technology, does not re-
quire a battery backup for the message storage device, thus
reducing the system cost and complexity.
When necessary, the CompactSPEECH can be switched to
power-down mode, which considerably reduces the power
consumption of the whole system.
The CompactSPEECH includes an on-chip English vocabu-
lary for time-and-day stamp announcements and voice
prompts. In addition to the on-chip vocabulary, the Com-
pactSPEECH supports external vocabularies (resident on
external ROM or AFLASH) which can be used to implement
voice prompts in various languages. Several vocabularies
can be supported simultaneously.
This chapter describes the features of the Compact-
SPEECH processor and how they work together.
1.2 THE STATE MACHINE
The CompactSPEECH functions as a state machine. It
changes state either in response to a command sent by the
microcontroller, after execution of the command is complet-
ed, or as a result of an internal event (e.g., memory full or
power failure).
The CompactSPEECH may be in one of the following
states:
RESET
The CompactSPEECH is initialized to this state after a full
hardware reset by the RESET signal (see Section 2.2).
CompactSPEECH detectors (VOX, call progress tones and
DTMF tones) are not active. In all other states, the detec-
tors are active. (See the SDET and RDET commands for
further details.)
IDLE
This is the state from which most commands are executed.
As soon as a command and all its parameters are received,
the CompactSPEECH starts executing the command.
PLAY
In this state a message is decompressed, and played.
RECORD
In this state a message is compressed, and recorded into
the message memory.
SYNTHESIS
An individual word or a sentence is synthesized from the on-
chip, or an external, vocabulary.
TONEDGENERATE
The CompactSPEECH generates single or DTMF tones.
MEMORYDREAD
The CompactSPEECH reads a 32-byte block from the mes-
sage memory and sends it to the external microcontroller.
MEMORYDWRITE
The CompactSPEECH accepts a 32-byte block from the ex-
ternal microcontroller and writes it to the message memory.
MEMORYDFREE
The CompactSPEECH takes memory space that was freed
by the DM and DMS commands, and makes it available for
new messages. This process occurs only with NSAM265SF
where FLASH memory is used for message storage.
After receiving an asynchronous command, (see Section
1.3) such as P (Playback), R (Record), SW (Say Words) or
GT (Generate Tone), the CompactSPEECH switches to the
appropriate state and executes the command until it is com-
pleted, or an S (Stop) or PA (Pause) command is received
from the microcontroller.
When an asynchronous command execution is completed,
the CompactSPEECH switches to the IDLE state.
Table 1-1 shows the CompactSPEECH commands, the
source states in which these commands are valid, and the
result states which the CompactSPEECH enters as a result
of the command.
4
相關PDF資料
PDF描述
NSAM266SVLJ 4 Mbit Uniform Sector, Serial Flash Memory
NSAM266SA 4 Mbit Uniform Sector, Serial Flash Memory
NSAM266SAA 4 Mbit Uniform Sector, Serial Flash Memory
NSB8 BASIC interpreter for Z80 family
NSB9435T1 High Current Bias Resistor Transistors(高強度電流偏置電阻晶體管)
相關代理商/技術參數
參數描述
NSAM265SRAV 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Solid-State Recorder
NSAM265SRAVLJ 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Solid-State Recorder
NSAM266SA 制造商:NSC 制造商全稱:National Semiconductor 功能描述:NSAM266SA CompactSPEECHTM Digital Speech Processor with Serial Flash Interface
NSAM266SAA 制造商:NSC 制造商全稱:National Semiconductor 功能描述:NSAM266SA CompactSPEECHTM Digital Speech Processor with Serial Flash Interface
NSAM266SAA/V 制造商:NSC 制造商全稱:National Semiconductor 功能描述:NSAM266SA CompactSPEECHTM Digital Speech Processor with Serial Flash Interface