880
SAM9G45 [DATASHEET]
6438K–ATARM–12-Feb-13
39.5.11
ISI Status Register
Register Name:
ISI_SR
Access Type:
Read
Reset Value:
0x00000000
ENABLE (this bit is a status bit)
0: Module is enabled.
1: Module is disabled.
DIS_DONE: Module Disable Request has Terminated
1: Disable request has completed. This flag is reset after a read operation.
SRST: Module Software Reset Request has Terminated
1: Software reset request has completed. This flag is reset after a read operation.
CDC_PND: Pending Codec Request (this bit is a status bit)
0: Indicates that no Codec request is pending.
1: Indicates that the request has been taken into account but cannot be serviced within the current frame. The operation is
postponed to the next frame.
VSYNC: Vertical Synchronization
1: Indicates that a Vertical synchronization has been detected since the last read of the status register.
PXFR_DONE: Preview DMA Transfer has Terminated.
When set to one, this bit indicates that the DATA transfer on the preview channel has completed. This flag is reset after a
read operation.
CXFR_DONE: Codec DMA Transfer has Terminated.
When set to one, this bit indicates that the DATA transfer on the codec channel has completed. This flag is reset after a
read operation.
SIP: Synchronization in Progress (this is a status bit)
When the status of the preview or codec DMA channel is modified, a minimum amount of time is required to perform the
clock domain synchronization. This bit is set when this operation occurs. No modification of the channel status is allowed
when this bit is set, to guarantee data integrity.
31
30
29
28
27
26
25
24
––––
FR_OVR
CRC_ERR
C_OVR
P_OVR
23
22
21
20
19
18
17
16
––––
SIP
–
CXFR_DONE
PXFR_DONE
15
14
13
12
11
10
9
8
–––––
VSYNC
–
CDC_PND
76543210
–––––
SRST
DIS_DONE
ENABLE