參數資料
型號： LU3X54FT
英文描述： QUAD-FET (Fast Ethernet Transceiver) for 10Base-T/100Base-TX/FX
中文描述： 四場效應管（快速以太網收發器）的10Base-T/100Base-TX/FX
文件頁數： 5/54頁
文件大?。?/td> 677K
代理商： LU3X54FT
Lucent Technologies Inc.
5
Data Sheet
July 2000
LU3X54FT
QUAD-FET for 10Base-T/100Base-TX/FX
Description
(continued)
Bused MII Mode
(continued)
The bused mode has two additional submodes of
operation:
I
Separate Bused MII Mode.
This mode is designed
to operate with two independent repeater ICs, one
repeater operating at 100 Mbits/s and the other oper-
ating at 10 Mbits/s.
Figure 6 shows a block diagram of this mode in which
separate pins (four of each) are used for COL_10(4),
COL_100(4), CRS_10(4), CRS_100(4),
RX_EN10(4), RX_EN100(4), TX_EN10 (4), and
TX_EN100(4).
The signals RX_CLK10, RXD_10, TX_CLK10, and
TXD_10 (all from ports A, B, C, and D) are internally
bused together and connected to MII port B.
The signals TX_CLK25, TXD_100[3:0], TX_ER,
RX_CLK25, RXD_100[3:0], RX_DV, and RX_ER (all
from ports A, B, C, D) are internally bused together
and connected to MII port A.
The repeater ICs will enable the particular port to
which it will communicate by enabling the port with
TX_EN 10, TX_EN100, RX_EN10, or RX_EN100.
I
Smart Bused MII Mode.
This mode is used when
the LU3X54FT is communicating with a single
(smart) 10/100 Mbits/s repeater IC, and allows the
use of the security feature.
Figure 5 shows a block diagram of the smart bused
mode of operation. In this mode, a common set of
pins is used for CRS10/100, RX_EN10/100,
TX_EN10/100, and COL_10/100.
The 10 Mbits/s (7-pin 10 Mbits/s serial interface) sig-
nals are still routed to port B (RX_CLK10, RXD_10,
TX_CLK10, and TXD_10).
The 100 Mbits/s signals are still routed to port A
(TX_CLK25, TXD_100[3:0], TX_ER, RX_CLK25,
RXD_100[3:0], RX_DV, and RX_ER).
The bused interface allows each of the four transceiv-
ers to be connected to one of two system interfaces:
I
Port A: 100 Mbits/s MII interface.
I
Port B: 7-pin 10 Mbits/s serial interface.
This configuration allows 10/100 Mbits/s segment seg-
regation or port switching with conventional multiport
shared-media repeaters.
The port speed configuration and connection to the
appropriate bused output is done automatically and is
controlled by autonegotiation.
Figure 1 gives a functional overview of the LU3X54FT
while Figure 2 details its single-channel functions.
Figure 3 shows how the LU3X54FT single channel
interfaces to the twisted pair (TP).
Clocking
The LU3X54FT requires an internal 25 MHz clock and
a 20 MHz clock to run the 100Base-TX transceiver and
10Base-T transceiver.
These clocks can be supplied as follows:
I
As separate clock inputs: 25 MHz and 20 MHz.
I
The 20 MHz clock can be internally synthesized from
the 25 MHz clock.
I
The 25 MHz clock can also be internally generated
by an on-chip oscillator if an external crystal is sup-
plied.
The LU3X54FT will automatically detect if a 25 MHz
clock is supplied, or if a crystal is being used to gener-
ate the 25 MHz clock.
相關PDF資料
PDF描述
LU3X54FTL QUAD-FET for 10Base-T/100Base-TX/FX
LU3X54FTL-HS208-DB QUAD-FET for 10Base-T/100Base-TX/FX
LU3X54FT Quad-FET (Fast Ethernet Transceiver) for 10Base-T/100Base-TX/FX(應用于10基數-T和100基數-TX/FX的四快速以太網收發器)
LU5X34F Quad Gigabit Ethernet Transceiver
LU5X34F Quad Gigabit Ethernet Transceiver(千兆位以太網四收發器)
相關代理商/技術參數
參數描述
LU3X54FTL 制造商:AGERE 制造商全稱:AGERE 功能描述:QUAD-FET for 10Base-T/100Base-TX/FX
LU3X54FTLHS208 制造商:Alcatel-Lucent 功能描述:3X54FTLHS208
LU3X54FTL-HS208-DB 制造商:AGERE 制造商全稱:AGERE 功能描述:QUAD-FET for 10Base-T/100Base-TX/FX
LU3X54FTLHS208-DB 制造商:Alcatel-Lucent 功能描述:3X54FTLHS208-DB
LU400 制造商:MA-COM 制造商全稱:M/A-COM Technology Solutions, Inc. 功能描述:NEMA Cabinet Legs
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*