參數資料
型號： LU3X54FT
英文描述： QUAD-FET (Fast Ethernet Transceiver) for 10Base-T/100Base-TX/FX
中文描述： 四場效應管（快速以太網收發器）的10Base-T/100Base-TX/FX
文件頁數： 24/54頁
文件大?。?/td> 677K
代理商： LU3X54FT
LU3X54FT
QUAD-FET for 10Base-T/100Base-TX/FX
Data Sheet
July 2000
24
Lucent Technologies Inc.
43
ISET_100
I
Current Set 100 Mbits/s.
An external resistor (nominally 24.9 k
) is
placed from this pin to ground to set the 100 Mbits/s TP driver transmit
output level.
10 MHz Input Clock.
Optional reference clock for 10 Mbits/s repeater
mode for phase alignment. When used, TX_CLK will be driven from
REF10. If not used, let this pin float.
20 MHz Input Clock.
20 MHz (
±
100 ppm) TTL level clock with
45%—55% duty cycle. If the internal 20 MHz clock synthesizer is being
used, ground this pin (default).
Transmit LED[D].
This pin indicates transmit activity on port D. Exter-
nal buffers are necessary to drive the LEDs.
Carrier Integrity Enable.
At powerup or reset, if this pin is pulled high
through a 4.7 k
resistor, it will enable the carrier integrity function of
register 29, bit 3, if station management is unavailable.
114
REF10
I
27
CLK20
I
166
TXLED[D]/
CARIN_EN
I/O
This pin has an internal 50 k
pull-down resistor for normal operation
(CARIN_EN is disabled). This input and register bits [29.3] are ORed
together.
Transmit LED[C].
This pin indicates transmit activity on port C. Exter-
nal buffers are necessary to drive the LEDs.
Encoder/Decoder Bypass.
At powerup or reset, if this pin is pulled
high through a 4.7 k
resistor, it will enable the ENC_DEC_BYPASS
function of register 29, bit 6, if station management is unavailable.
165
TXLED[C]/
ENC_DEC_BYPASS
I/O
This pin has an internal 50 k
pull-down resistor for normal operation
(encoder/decoder ON). This input and the register bit [29.6] are ORed
together enabling the encoder/decoder bypass function for all four
channels.
Transmit LED[B].
This pin indicates transmit activity on port B. Exter-
nal buffers are necessary to drive the LEDs.
Scrambler/Descrambler Bypass.
At powerup or reset, this pin may
be used to enable the SCRAM_DESC_BYPASS function by pulling this
pin high through a 4.7 k
resistor, if station management is unavail-
able. This is the same function as register 29, bit 4.
164
TXLED[B]/
SCRAM_DESC_BYPASS
I/O
This pin has an internal 50 k
pull-down resistor for normal operation
(scrambler/descrambler ON). This input and the register bit [29.4] are
ORed together during powerup and reset.
Transmit LED[A].
This pin indicates transmit activity on port A. Exter-
nal buffers are necessary to drive the LEDs.
Reference Select.
At powerup, this pin may be used to select the
10 MHz reference input of pin REF10 by pulling it high through a 4.7 k
resistor, if station management is unavailable. This is the same function
as register 30, bit 2.
162
TXLED[A]/
REF_SEL
I/O
This pin has an internal 50 k
pull-down resistor for normal operation
(REF10 not used). This input and the register bit are ORed together.
Pin Information
(continued)
Pin Descriptions
(continued)
Table 7. Miscellaneous Pins
(continued)
Pin
Signal
Type
Description
相關PDF資料
PDF描述
LU3X54FTL QUAD-FET for 10Base-T/100Base-TX/FX
LU3X54FTL-HS208-DB QUAD-FET for 10Base-T/100Base-TX/FX
LU3X54FT Quad-FET (Fast Ethernet Transceiver) for 10Base-T/100Base-TX/FX(應用于10基數-T和100基數-TX/FX的四快速以太網收發器)
LU5X34F Quad Gigabit Ethernet Transceiver
LU5X34F Quad Gigabit Ethernet Transceiver(千兆位以太網四收發器)
相關代理商/技術參數
參數描述
LU3X54FTL 制造商:AGERE 制造商全稱:AGERE 功能描述:QUAD-FET for 10Base-T/100Base-TX/FX
LU3X54FTLHS208 制造商:Alcatel-Lucent 功能描述:3X54FTLHS208
LU3X54FTL-HS208-DB 制造商:AGERE 制造商全稱:AGERE 功能描述:QUAD-FET for 10Base-T/100Base-TX/FX
LU3X54FTLHS208-DB 制造商:Alcatel-Lucent 功能描述:3X54FTLHS208-DB
LU400 制造商:MA-COM 制造商全稱:M/A-COM Technology Solutions, Inc. 功能描述:NEMA Cabinet Legs
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*