參數資料
型號： CYNSE70256
英文描述： Network Processing
中文描述： 網絡處理
文件頁數： 31/126頁
文件大?。?/td> 3302K
代理商： CYNSE70256
CYNSE70032
Document #: 38-02042 Rev. *E
Page 31 of 126
the command) is compared with each entry in the table, starting at location 0. The first matching entry’s location address L is the
winning address that is driven as part of the SRAM address on the SADR[21:0] lines (see “SRAM Addressing” on page 98). The
global winning device will drive the bus in a specific cycle. On a global miss cycle the device with LRAM = 1 (default driving device
for the SRAM bus) and LDEV = 1 (default driving device for SSF and SSV signals) will be the default driver for such missed cycles.
The Search command is a pipelined operation and executes a Search at half the rate of the frequency of CLK2X for 68-bit
searches in ×68-configured tables. The latency of SADR, CE_L, ALE_L, WE_L, SSV, and SSF from the 68-bit Search command
cycle (two CLK2X cycles) is shown in
Table 13-4
.
Search latency from command to SRAM access cycle is 5 for up to eight devices in the table (TLSZ = 01). SSV and SSF also
shift further to the right for different values of HLAT as specified in
Table 13-5
.
13.3
The hardware diagram of the Search subsystem of 31 devices is shown in
Figure 13-9
. Each of the four blocks in the diagram
represents eight CYNSE70032 devices (except the last, which has seven devices). The diagram for a block of eight devices is
shown in
Figure 13-10
. The following are the parameters that are programmed into the 31 devices.
First thirty devices (devices 0–29): CFG = 00000000, TLSZ = 10, HLAT = 001, LRAM = 0, and LDEV = 0.
Thirty-first device (device 30): CFG = 00000000, TLSZ = 10, HLAT = 001, LRAM = 1, and LDEV = 1.
Note
. All devices must be programmed with the same values for TLSZ and HLAT. Only the last device in the table (device
number 30 in this case) must be programmed with LRAM = 1 and LDEV = 1. All other upstream devices (devices 0 through 29
in this case) must be programmed with LRAM = 0 and LDEV = 0.
68-bit Search on Tables Configured as ×68 Using up to 31 CYNSE70032 Devices
Table 13-4. Search latency from Instruction to SRAM Access Cycle
Number of Devices
1 (TLSZ = 00)
1–8 (TLSZ = 01)
1–31 (TLSZ = 10)
Max Table Size
16K × 68 bits
128K × 68 bits
496K × 68 bits
Latency in CLK Cycles
4
5
6
Table 13-5. Shift of SSF and SSV from SADR
HLAT
000
001
010
011
100
101
110
111
Number of CLK Cycles
0
1
2
3
4
5
6
7
CFG = 00000000
(68-bit configuration)
67
0
Location
address
1
2
3
131071
K
GMR
Comparand Register (Odd)
K
Comparand Register (Even)
K
67
0
67
0
(First matching entry)
L
Must be same in each of the eight
devices
Will be the same in each of the eight
devices
0
Figure 13-8. ×68 Table with Eight Devices
相關PDF資料
PDF描述
CZET101 Clock Driver
CZEU101 Quad Peripheral Driver
CZEZ101 Triple Peripheral Driver
CZSP103 Voltage Reference
CZT122 TRANSISTOR | BJT | DARLINGTON | NPN | 100V V(BR)CEO | 5A I(C) | SOT-223
相關代理商/技術參數
參數描述
CYNSE70256-66BGC 制造商:Cypress Semiconductor 功能描述:
CYNSE70256-66BHC 制造商:Cypress Semiconductor 功能描述:COMMUNICATIONS, NETWORK SEARCH ENGINE - Trays
CYONS10017-LBXC 制造商:Cypress Semiconductor 功能描述:
CYONS1001G-LBXC 制造商:Cypress Semiconductor 功能描述: 制造商:Rochester Electronics LLC 功能描述:
CYONS1001L 制造商:CYPRESS 制造商全稱:Cypress Semiconductor 功能描述:OvationONS⑩ 1L - Laser Navigation Sensor
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*