參數資料
型號: AM42DL6404G
英文描述: 64 Mbit (8 M x 8-Bit/4 M x 16-Bit) CMOS and 4 Mbit (256 K x 16-Bit) Static RAM (Preliminary)
中文描述: 64兆位(8米× 8位/ 4米× 16位)CMOS和4兆位(256畝× 16位),靜態存儲器(初步)
文件頁數: 19/60頁
文件大小: 956K
代理商: AM42DL6404G
18
Am42DL16x2D
March 4, 2002
P R E L I M I N A R Y
The device is shipped with all sectors unprotected.
It is possible to determine whether a sector is pro-
tected or unprotected. See the Autoselect Mode
section for details.
Write Protect (WP#)
The Write Protect function provides a hardware
method of protecting certain boot sectors without
using V
ID
. This function is one of two provided by the
WP#/ACC pin.
If the system asserts V
IL
on the WP#/ACC pin, the de-
vice disables program and erase functions in the two
“outermost” 8 Kbyte boot sectors independently of
whether those sectors were protected or unprotected
using the method described in “Sector/Sector Block
Protection and Unprotection”. The two outermost 8
Kbyte boot sectors are the two sectors containing the
lowest addresses in a top-boot-configured device, or
the two sectors containing the highest addresses in a
top-boot-configured device.
If the system asserts V
IH
on the WP#/ACC pin, the de-
vice reverts to whether the two outermost 8 Kbyte boot
sectors were last set to be protected or unprotected.
That is, sector protection or unprotection for these two
sectors depends on whether they were last protected
or unprotected using the method described in “Sec-
tor/Sector Block Protection and Unprotection”.
Note that the WP#/ACC pin must not be left floating or
unconnected; inconsistent behavior of the device may
result.
Temporary Sector/Sector Block Unprotect
(Note: For the following discussion, the term “sector”
applies to both sectors and sector blocks. A sector
block consists of two or more adjacent sectors that are
protected or unprotected at the same time (see Tables
8 and 9).
This feature allows temporary unprotection of previ-
ously protected sectors to change data in-system. The
Sector Unprotect mode is activated by setting the RE-
SET# pin to V
ID
(8.5 V – 12.5 V). During this mode,
formerly protected sectors can be programmed or
erased by selecting the sector addresses. Once V
ID
is
removed from the RESET# pin, all the previously pro-
tected sectors are protected again. Figure 1 shows the
algorithm, and Figure 25 shows the timing diagrams,
for this feature.
START
Perform Erase or
Program Operations
RESET# = V
IH
Temporary Sector
Unprotect Completed
(Note 2)
RESET# = V
ID
(Note 1)
Notes:
1. All protected sectors unprotected (If WP#/ACC = V
IL
,
outermost boot sectors will remain protected).
2. All previously protected sectors are protected once
again.
Figure 1.
Temporary Sector Unprotect Operation
相關PDF資料
PDF描述
AM42DL640AG 200NS, CERDIP, 883C; LEV B COMPLIANT(EEPROM)
AM42DL640AH 200NS, TSOP, IND TEMP(EEPROM)
AM42SERIES GaAs MMIC VSAT Power Amplifier, 2W, 5.9-6.4 GHz
AM42-0040 GaAs MMIC VSAT Power Amplifier, 2W 5.9 - 6.4 GHz
AM4457F3C_05 1.5mm SIDE LOOK INFRA-RED EMITTING DIODE
相關代理商/技術參數
參數描述
AM42DL6404G70I 制造商:Spansion 功能描述:COMBO 4MX16/8MX8 FLASH + 256KX16 SRAM 3V/3.3V 73FBGA - Trays
AM42DL6404G70IS 制造商:SPANSION 制造商全稱:SPANSION 功能描述:Stacked Multi-Chip Package (MCP) Flash Memory and SRAM
AM42DL6404G70IT 制造商:AMD 制造商全稱:Advanced Micro Devices 功能描述:64 Megabit (8 M x 8-Bit/4 M x 16-Bit) CMOS 3.0 Volt-only, Simultaneous Operation Flash Memory and 4 Mbit (256 K x 16-Bit) Static RAM
AM42DL6404G85IS 制造商:AMD 制造商全稱:Advanced Micro Devices 功能描述:64 Megabit (8 M x 8-Bit/4 M x 16-Bit) CMOS 3.0 Volt-only, Simultaneous Operation Flash Memory and 4 Mbit (256 K x 16-Bit) Static RAM
AM42DL6404G85IT 制造商:AMD 制造商全稱:Advanced Micro Devices 功能描述:64 Megabit (8 M x 8-Bit/4 M x 16-Bit) CMOS 3.0 Volt-only, Simultaneous Operation Flash Memory and 4 Mbit (256 K x 16-Bit) Static RAM