參數資料
型號： ADSP-2192M
廠商： Analog Devices, Inc.
元件分類： 數字信號處理
英文描述： DSP Microcomputer
中文描述： DSP微機
文件頁數： 19/40頁
文件大?。?/td> 1307K
代理商： ADSP-2192M
–19–
REV. 0
ADSP-2192M
write the address to be written to the USB Register I/O Address
register. Bit 15 of the USB Register I/O Address register starts
the transaction and Bit 14 is set to one to indicate a WRITE.
USB REGIO (register write) is a three-stage control transfer with
an OUT data stage. Stage 1 is the SETUP stage, stage 2 is the
data stage involving the OUT packet, and stage 3 is the status
stage. See
Table 19
for details about the USB REGIO (register
write) fields.
USB REGIO (Read)
Address 15–15 = 1 indicates a read to the MCU register space;
Address 15–15 = 0 indicates a read to the DSP register space.
When accessing DSP register space, the MCU must write the
address to be read to the USB Register I/O Address register.
Bit 15 of the USB Register I/O Address register starts the trans-
action, and Bit 14 is set to zero to indicate a READ. The data
read will be placed into the USB Register I/O Data register.
USB REGIO (register read) is a three-stage control transfer with
an IN data stage. Stage 1 is the SETUP stage, stage 2 is the data
stage involving the IN packet, and stage 3 is the status stage. See
Table 20
for details about the USB REGIO (register read) fields.
DSP Code Download
Because EP0 has a max packet size of only eight, downloading
DSP code on EP0 can be inefficient when operating on a UHCI
controller that allows only a fixed quantity of control transactions
per frame. Therefore, to gain better throughput for code down-
load, downloading of DSP code involves synchronizing a control
SETUP command on EP0 with BULK OUT commands on
endpoints 1, 2, or 3. Each endpoint has an associated DSP down-
load address that is set by using USB REGIO (write) command.
Because three possible interfaces are supported, each interface
has its own DSP download address and uses its own BULK pipe
to download code. The driver for each interface must set the
download address before beginning to use the BULK pipe to
download DSP code. The download address will auto-increment
as each byte of data is sent on the BULK pipe to the DSP.
DSP instructions are three bytes long, and USB BULK pipes
have even-number packet sizes. The instructions to be down-
loaded must be formatted into four-byte groups with the least
significant byte always zero. The USB interface strips off the least
significant byte and properly formats the DSP instruction before
writing it into the program memory. For example, to write the
three-byte opcode 0x400000 to DSP program memory, the
driver sends 0x40000000 down the BULK pipe.
The following example illustrates the proper order of commands
and synchronizing that the driver must follow.
1. Device enumerates with two interfaces. Each interface
has the capability to download DSP code and can initiate
at any time.
2. The driver for interface 1 begins code download by
sending the USB REGIO (write) command with the
starting download address. The driver must wait for this
command to finish before starting code download.
3. The driver for interface 2 begins code download by
sending the USB REGIO (write) command with the
starting download address. The driver must wait for this
command to finish before starting code download.
4. Each driver now streams the code to be downloaded to
the DSP: driver 1 onto BULK EP1 for interface 1, and
driver 2 onto BULK EP2 for interface 2. The code is
written to the DSP in 3-byte instructions starting at the
Table 18. USB MCUCODE (Code Download)
Offset
Field
Size
Value
Description
0
bmRequest
1
0x40
Vendor Request,
OUT
USB
MCUCODE
Address 7–0
Address 15–8
1
bRequest
1
0xA1
2
3
4
5
6
wValue (L)
wValue (H)
wIndex (L)
wIndex (H)
wLength (L)
1
1
1
1
1
XXX
XXX
0x00
0x00
0xXX
1
Length = XX
bytes
Length = YY
bytes
7
wLength (H)
1
0xYY
2
1
XX is user-specified.
2
YY is user-specified.
Table 19. USB REGIO (Register Write)
Offset
Field
Size
Value
Description
0
bmRequest
1
0x40
Vendor Request,
OUT
USB REGIO
Address 7–0
Address 15–8
1
2
3
4
5
6
bRequest
wValue (L)
wValue (H)
wIndex (L)
wIndex (H)
wLength (L)
1
1
1
1
1
1
0xA0
XXX
XXX
0x00
0x00
0x02
Length =
02 bytes
7
wLength (H)
1
0x00
Table 20. USB REGIO (Register Read)
Offset
Field
Size
Value
Description
0
bmRequest
1
0xC0
Vendor Request,
IN
USB REGIO
Address 7–0
Address 15–8
1
2
3
4
5
6
bRequest
wValue (L)
wValue (H)
wIndex (L)
wIndex (H)
wLength (L)
1
1
1
1
1
1
0xA0
XXX
XXX
0x00
0x00
0x02
Length =
02 bytes
7
wLength (H)
1
0x00
相關PDF資料
PDF描述
ADSP-21992 Mixed Signal DSP Controller With CAN
ADSP-21992YST Mixed Signal DSP Controller With CAN
ADSP-21MOD970-510 Multiport Internet Gateway Processor Data Pump Solution(多端口網關處理器數據泵解決方案)
ADSP-21mod970 Multi-Port Internet Gateway Processor(多口網關處理器)
ADSP-21msp58 DSP Microcomputer(DSP 微計算機)
相關代理商/技術參數
參數描述
ADSP-2195MBCA-140 制造商:Analog Devices 功能描述:DSP Fixed-Point 24-Bit 140MHz 140MIPS 144-Pin CSP-BGA 制造商:Rochester Electronics LLC 功能描述:16-BIT,140 MIPS, 2.5V, 80KBYTES RAM - Bulk
ADSP-2195MBST-140 功能描述:IC DSP CONTROLLER 16BIT 144LQFP RoHS:否 類別:集成電路 (IC) >> 嵌入式 - DSP（數字式信號處理器） 系列:ADSP-21xx 標準包裝:40 系列:TMS320DM64x, DaVinci™ 類型:定點 接口:I²C，McASP，McBSP 時鐘速率:400MHz 非易失內存:外部 芯片上RAM:160kB 電壓 - 輸入/輸出:3.30V 電壓 - 核心:1.20V 工作溫度:0°C ~ 90°C 安裝類型:表面貼裝 封裝/外殼:548-BBGA，F(xiàn)CBGA 供應商設備封裝:548-FCBGA（27x27） 包裝:托盤 配用:TMDSDMK642-0E-ND - DEVELPER KIT W/NTSC CAMERA296-23038-ND - DSP STARTER KIT FOR TMS320C6416296-23059-ND - FLASHBURN PORTING KIT296-23058-ND - EVAL MODULE FOR DM642TMDSDMK642-ND - DEVELOPER KIT W/NTSC CAMERA
ADSP-2195MKCA-160 制造商:Analog Devices 功能描述:DSP Fixed-Point 24-Bit 160MHz 160MIPS 144-Pin CSP-BGA 制造商:Rochester Electronics LLC 功能描述:16-BIT,160 MIPS, 2.5V, 80KBYTES RAM - Bulk
ADSP-2195MKST-160 制造商:Analog Devices 功能描述:DSP Fixed-Point 24-Bit 160MHz 160MIPS 144-Pin LQFP 制造商:Analog Devices 功能描述:IC MICROCOMPUTER 16-BIT
adsp-2196mbca-140 制造商:Analog Devices 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*