參數資料
型號: AD9852ASTZ
廠商: Analog Devices Inc
文件頁數: 13/52頁
文件大?。?/td> 0K
描述: IC DDS SYNTHESIZER CMOS 80-LQFP
產品培訓模塊: Direct Digital Synthesis Tutorial Series (1 of 7): Introduction
Direct Digital Synthesizer Tutorial Series (7 of 7): DDS in Action
Direct Digital Synthesis Tutorial Series (3 of 7): Angle to Amplitude Converter
Direct Digital Synthesis Tutorial Series (6 of 7): SINC Envelope Correction
Direct Digital Synthesis Tutorial Series (4 of 7): Digital-to-Analog Converter
Direct Digital Synthesis Tutorial Series (2 of 7): The Accumulator
標準包裝: 1
分辨率(位): 12 b
主 fclk: 200MHz
調節字寬(位): 48 b
電源電壓: 3.14 V ~ 3.47 V
工作溫度: -40°C ~ 85°C
安裝類型: 表面貼裝
封裝/外殼: 80-LQFP
供應商設備封裝: 80-LQFP(14x14)
包裝: 托盤
產品目錄頁面: 552 (CN2011-ZH PDF)
配用: AD9852/PCBZ-ND - BOARD EVAL FOR AD9852
AD9852
Rev. E | Page 20 of 52
I/O UD CLK
F1
F2
0
FREQUENCY
MODE
TW1
TW2
010 (RAMPED FSK)
F1
F2
000 (DEFAULT)
0
REQUIRES A POSITIVE TWOS COMPLEMENT VALUE
RAMP RATE
DFW
FSK DATA (PIN 29)
00634-034
Figure 34. Ramped FSK Mode (Start at F1)
F1
F2
0
FREQUENCY
MODE
TW1
TW2
FSK DATA (PIN 29)
010 (RAMPED FSK)
F1
F2
000 (DEFAULT)
0
I/O UD CLK
00634-035
Figure 35. Ramped FSK Mode (Start at F2)
The purpose of ramped FSK is to provide better bandwidth
containment than can be achieved using traditional FSK. In
ramped FSK, the instantaneous frequency changes of traditional
FSK are replaced with more gradual, user-defined frequency
changes. The dwell time at F1 and F2 can be equal to or much
greater than the time spent at each intermediate frequency. The
user controls the dwell time at F1 and F2, the number of
intermediate frequencies, and the time spent at each frequency.
Unlike unramped FSK, ramped FSK requires the lowest
frequency to be loaded into the F1 registers and the highest
frequency to be loaded into the F2 registers.
Several registers must be programmed to instruct the DDS
regarding the resolution of intermediate frequency steps (48 bits)
and the time spent at each step (20 bits). Furthermore, the CLR
ACC1 bit in the control register should be toggled (low-high-low)
prior to operation to ensure that the frequency accumulator is
starting from an all 0s output condition.
For piecewise, nonlinear frequency transitions, it is necessary
to reprogram the registers while the frequency transition is in
progress to affect the desired response.
Parallel Register Address 1A hex to Parallel Register Address 1C
hex comprise the 20-bit ramp rate clock registers. This is a
countdown counter that outputs a single pulse whenever the
count reaches 0. The counter is activated any time a logic level
change occurs on the FSK input (Pin 29). This counter is run at
the system clock rate, 300 MHz maximum. The time period
between each output pulse is
(N + 1) × System Clock Period
where N is the 20-bit ramp rate clock value programmed by
the user.
The allowable range of N is from 1 to (220 1). The output of
this counter clocks the 48-bit frequency accumulator shown in
相關PDF資料
PDF描述
VE-2WY-IY-F4 CONVERTER MOD DC/DC 3.3V 33W
VE-2WY-IX-F3 CONVERTER MOD DC/DC 3.3V 49.5W
AD9953YSVZ IC DDS DAC 14BIT 400MSPS 48-TQFP
VE-2WX-IY-F4 CONVERTER MOD DC/DC 5.2V 50W
DS3174+ IC TXRX DS3/E3 QUAD 400-BGA
相關代理商/技術參數
參數描述
AD9852ASTZ 制造商:Analog Devices 功能描述:IC DDS 100MHZ LQFP-80
AD9852ASTZ1 制造商:AD 制造商全稱:Analog Devices 功能描述:CMOS 300 MSPS Complete DDS
AD9852ASVZ 功能描述:IC DDS SYNTHESIZER CMOS 80-TQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 直接數字合成 (DDS) 系列:- 產品變化通告:Product Discontinuance 27/Oct/2011 標準包裝:2,500 系列:- 分辨率(位):10 b 主 fclk:25MHz 調節字寬(位):32 b 電源電壓:2.97 V ~ 5.5 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:16-TSSOP(0.173",4.40mm 寬) 供應商設備封裝:16-TSSOP 包裝:帶卷 (TR)
AD9852ASVZ 制造商:Analog Devices 功能描述:IC DDS 300MHz TQFP-80 制造商:Analog Devices 功能描述:IC, DDS, 300MHz, TQFP-80
AD9852ASVZ1 制造商:AD 制造商全稱:Analog Devices 功能描述:CMOS 300 MSPS Complete DDS