參數資料
型號： W942516BH
英文描述： DRAM
中文描述： 內存
文件頁數： 19/45頁
文件大小： 1601K
代理商： W942516BH
W942508BH
Publication Release Date: March 19, 2002
- 19 -
Revision A1
16. FUNCTIONAL DESCRIPTION
Power Up Sequence
(1) Apply power and attempt to CKE at a low state (
≤
0.2V), all other inputs may be undefined
1) Apply V
DD
before or at the same time as V
DDQ
.
2) Apply V
DDQ
before or at the same time as V
TT
and V
REF
.
(2) Start Clock and maintain stable condition for 200
μ
S (min.).
(3) After stable power and clock, apply NOP and take CKE high.
(4) Issue EMRS (Extended Mode Register Set) to enable DLL and establish Output Driver Type.
(5) Issue MRS (Mode Register Set) to reset DLL and set device to idle with bit A8.
(an additional 200 cycles(min) of clock are required for DLL Lock)
(6) Issue precharge command for all banks of the device.
(7) Issue two or more Auto Refresh commands.
(8) Issue MRS-Initialize device operation.
(If device operation mode is set at sequence 5, sequence 8 can be skipped.)
Command Function
1. Bank Activate Command
(RAS = "L", CAS = "H", WE = "H", BS0, BS1 = Bank, A0 to A12 = Row Address)
The Bank Activate command activates the bank designated by the BS (Bank address) signal. Row
addresses are latched on A0 to A12 when this command is issued and the cell data is read out of
the sense amplifiers. The maximum time that each bank can be held in the active state is specified
as t
RAS (max)
. After this command is issued, Read or Write operation can be executed.
2. Bank Precharge Command
(RAS = "L", CAS = "H", WE = "L", BS0, BS1 = Bank, A10 = "L", A0 to A9, A11, A12 = Don’t
care)
The Bank Precharge command percharges the bank designated by BS. The precharged bank is
switched from the active state to the idle state.
3. Precharge All Command
(RAS = "L", CAS = "H", WE = "L", BS0, BS1 = Don’t care, A10 = "H", A0 to A9, A11, A12 =
Don’t care)
The Precharge All command precharges all banks simultaneously. Then all banks are switched to
the idle state.
4. Write Command
(RAS = "H", CAS = "L", WE = "L", BS0, BS1 = Bank, A10 = "L", A0 to A9, A11 = Column
Address)
相關PDF資料
PDF描述
W9451GBDA-6 SDRAM|DDR|64MX64|CMOS|DIMM|184PIN|PLASTIC
W981204AH-75 x4 SDRAM
W981204AH-8H x4 SDRAM
W982504AH-7 x4 SDRAM
W982504AH-75 x4 SDRAM
相關代理商/技術參數
參數描述
W942516CH 制造商:WINBOND 制造商全稱:Winbond 功能描述:4M X 4 BANKS X 16 BIT DDR SDRAM
W9425G6DH 制造商:WINBOND 制造商全稱:Winbond 功能描述:4M X 4 BANKS X 16 BITS DDR SDRAM
W9425G6EH 制造商:WINBOND 制造商全稱:Winbond 功能描述:4 M 】 4 BANKS 】 16 BITS DDR SDRAM
W9425G6EH_0812 制造商:WINBOND 制造商全稱:Winbond 功能描述:4 M × 4 BANKS × 16 BITS DDR SDRAM
W9425G6EH-5 功能描述:IC DDR-400 SDRAM 256MB 66TSSOPII RoHS:是 類別:集成電路 (IC) >> 存儲器 系列:- 標準包裝:1,000 系列:- 格式 - 存儲器:EEPROMs - 串行 存儲器類型:EEPROM 存儲容量:4K (512 x 8) 速度:400kHz 接口:I²C，2 線串口 電源電壓:2.7 V ~ 5.5 V 工作溫度:-40°C ~ 85°C 封裝/外殼:8-SOIC（0.173"，4.40mm 寬） 供應商設備封裝:8-MFP 包裝:帶卷 (TR)
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*