
W28J161B/T
Publication Release Date: April 7, 2003
- 29 -
Revision A4
11. ELECTRICAL SPECIFICATIONS
Absolute Maximum Ratings*
Operating Temperature
During Read, Block Erase, Full Chip Erase, Word Write
and Lock-Bit Configuration ................................................................................................ -40
°C to +85°C (1)
Storage Temperature
During under Bias ................................................................................................................... -40
°C to +85°C
During non Bias .............................. ..................................................................................... .. -65
°C to +125°C
Voltage On Any Pin
(except VDD and VPP) ......... .......................................................................................... .. -0.5V to VDD +0.5V(2)
VDD Supply Voltage......................... .................................................................................. ....... -0.2V to +4.6V(2)
VPP Supply Voltage......................................................................................................... .... -0.2V to +13.0V(2, 3)
Output Short Circuit Current............. ....................................................................................................100 mA(4)
*WARNING: Stressing the device beyond the "Absolute Maximum Ratings" may cause permanent damage. These are stress
ratings only. Operation beyond the "Operating Conditions" is not recommended and extended exposure beyond the "Operating
Conditions" may affect device reliability.
Notes:
1. Operating temperature is for extended temperature product defined by this specification.
2. All specified voltages are with respect to VSS. Minimum DC voltage is -0.5V on input/output pins and -0.2V on VDD and VPP
pins. During transitions, this level may undershoot to -2.0V for periods <20 nS. Maximum DC voltage on input/output pins are
VDD +0.5V which, during transitions, may overshoot to VDD +2.0V for periods <20 nS.
3. Maximum DC voltage on VPP may overshoot to +13.0V for periods <20 nS. Applying 12V ±0.3V to VPP during erase/write can
only be done for a maximum of 1000 cycles on each block. VPP may be connected to 12V ±0.3V for a total of 80 hours
maximum.
4. Output shorted for no more than one second. No more than one output shorted at a time.
Operating Conditions
Temperature and VDD Operating Conditions
PARAMETER
SYMBOL
MIN.
MAX.
UNIT
TEST CONDITION
Operating Temperature
TA
-40
+85
°C
Ambient Temperature
VDD Supply Voltage (2.7V to 3.6V)
VDD
2.7
3.6
V
Capacitance
TA = +25
° C, f = 1 MHz
PARAMETER
SYMBOL
TYP.
MAX.
UNIT
CONDITION
Input Capacitance
CIN
7
10
pF
VIN = 0.0V
Output Capacitance
COUT
9
12
pF
VOUT = 0.0V
Note: Sampled, not 100% tested.