參數資料
型號： W19B320BTT-H
廠商： WINBOND ELECTRONICS CORP
元件分類： PROM
英文描述： 2M X 16 FLASH 3V PROM, 70 ns, PDSO48
封裝： TSOP-48
文件頁數： 27/56頁
文件大?。?/td> 0K
代理商： W19B320BTT-H
W19B320BT/B DATASHEET
Publication Release Date:Dec. 25, 2007
- 33 -
Revisionv A3
Notes:
1. See Bus Operations Table for details.
2. All values are in hexadecimal.
3. Except for the read cycle and the fourth cycle of the AUTOSELECT command sequence, all bus cycles are write cycles.
4. Data bits DQ15-DQ8 are don’t care in command sequences, except for RD and PD.
5. Unless otherwise noted, address bits A20-A11 are “don’t care”.
6. No unlock or command cycles required when bank is reading array data.
7. The Reset command is required to return to the read mode (or to the erase-suspend-read mode if previously in Erase
Suspend) when the device is in the AUTOSELECT mode, or if DQ5 goes high (while the device is providing status
information).
8. The fourth cycle of the AUTOSELECT command sequence is a read cycle. Data bits DQ15-DQ8 are don’t care. See the
AUTOSELECT Command Sequence section for more information.
9. The data is 82h for factory locked and 02h for not factory locked.
10. The data is 00h for an unprotected sector/sector block and 01h for a protected sector/sector block.
11. The Unlock Bypass command is required prior to the Unlock Bypass Program command.
12. The Unlock Bypass Reset command is required to return to the read mode when the bank is in the unlock bypass mode.
13. The system may read and program in non-erasing sectors, or enter the AUTOSELECT mode, when in the Erase
Suspend mode. The Erase Suspend command is valid only during a sector erase operation.
14. The Erase Resume command is valid only during the Erase Suspend mode.
15. Command is valid when device is ready to read array data or when device is in AUTOSELECT mode.
16. See Autoselect Codes table for device ID information
7.6.5
Write Operation Status
STATUS
DQ7
(NOTE 2)
DQ6
DQ5
(NOTE1)
DQ3
DQ2
(NOTE 2)
RY/#BY
Embedded Program
Algorithm
#DQ7
Toggle
0
N/A
No toggle
0
Standard
Mode
Embedded Erase
Algorithm
0
Toggle
0
1
Toggle
0
Erase
Suspended
Sector
1
No toggle
0
N/A
Toggle
1
Erase-
Suspend
Read
Non-Erase
Suspended
Sector
Data
1
Erase
Suspend
Mode
Erase-Suspend-Program
#DQ7
Toggle
0
N/A
0
Notes:
1. DQ5 switches to ‘1’ when an Embedded Program or Embedded Erase operation has exceeded the maximum timing
limits. Refer to DQ5 description section for more information.
2. DQ7 and DQ2 require a valid address when reading status information. Refer to the appropriate subsection for further
details.
3. When reading write operation status bits, the system must always provide the bank address where the Embedded
Algorithm is in progress. The device outputs array data if the system addresses a non-busy bank.
7.7 Temporary Sector Unprotect Algorithm
相關PDF資料
PDF描述
W24010T-70LL 128K X 8 STANDARD SRAM, 70 ns, PDSO32
W24L04S-70LI 512K X 8 STANDARD SRAM, 70 ns, PDSO32
W25P010AF-8 32K X 32 STANDARD SRAM, PQFP100
W25P020AD-7 64K X 32 STANDARD SRAM, 7 ns, PQFP100
W25P020AD-6 64K X 32 STANDARD SRAM, 6 ns, PQFP100
相關代理商/技術參數
參數描述
W19L-E02050 制造商:Cooper Crouse-Hinds 功能描述:
W19L-E03040 制造商:Cooper Crouse-Hinds 功能描述:
W19L-E04040 制造商:Cooper Crouse-Hinds 功能描述:
W19U_5LGA WAF 制造商:Fairchild Semiconductor Corporation 功能描述:
W1A 功能描述:ENCLOSURE 7.25X4.5 GREY RoHS:是 類別:盒，外殼，支架 >> 箱 系列:工具 產品目錄繪圖:SR Series Standard 特色產品:Customize Your Enclosure 標準包裝:1 系列:S 容器 - 類型:盒 尺寸/尺寸:3.600" L x 2.250" W（91.44mm x 57.15mm） 高度:1.500"（38.10mm） 面積 (L x W):8.10"（52.3cm） 設計:手持，分叉式雙側 材質:塑料 - ABS 顏色:杏黃 厚度:0.100"（2.54mm） 特點:PCB 支座 額定值:IP40，NEMA 1 材料可燃性額定值:UL94 HB 裝運信息:從 Digi-Key 運送 重量:0.137 磅（62.14g） 相關產品:SR6005-ND - SCREW NO.4X 3/8 H/L PANSRPS-11-ND - GASKET 3.63 X 2.27 INCHSR52-ND - BOX RUBBER FEET FOR "A" SERIESSR410-ND - PC BOARD COPPER CLADSR310-ND - PC BOARD .1" STD HORIZ GRIDSR50-ND - RUBBER FEET (1XX,2XX) 其它名稱:111-I ALMOND111-IA111-IALMONDSR111-IA
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*