
TDA8295_C2_2
NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 02 — 27 November 2009
40 of 83
NXP Semiconductors
TDA8295
Digital global standard low IF demodulator for analog TV and FM radio
9.3.13 Status registers: ADC saturation, AFC, H/V PLL and AGC
Table 40.
SSIF_LEVEL register (address 23h) bit description
Legend: * = default value.
Bit
Symbol
Access Value
Description
7 to 5 -
R/W
-
not used
4 to 0 SSIF_LVL[4:0]
R/W
SSIF output level
0 0001
12 dB nominal; implemented for flexibility reasons.
With this setting, the adaptation to different standard
requirements can be done.
0 0010
6 dB nominal; implemented for flexibility reasons.
With this setting, the adaptation to different standard
requirements can be done.
0 0100*
Nominal setting; typical output level is 55 mV (RMS)
0 1000
+6 dB nominal; implemented for flexibility reasons.
With this setting, the adaptation to different standard
requirements can be done.
1 0000
+12 dB nominal; implemented for flexibility reasons.
With this setting, the adaptation to different standard
requirements can be done.
X XXXX
don’t care if mono sound output is chosen
(SSIF_SND[1:0] = 01)
Table 41.
ADC_SAT register (address 24h) bit description
Bit
Symbol
Access Value
Description
7 to 0 ADC_SAT[7:0]
R
-
With ADC_SAT, the ADC saturation percentage in a
period of 40 ms can be calculated by the following
formula:
.
Table 42.
AFC register (address 25h) bit description
Bit
Symbol
Access Value
Description
7 to 0 AFC[7:0]
R
-
This is the readout for
AFC[1]. AFC contains the
frequency deviation from nominal IF picture carrier.
The format is twos complement, 13.2 kHz steps are
The frequency deviation could also be given by the
following formula:
.
For a frequency deviation from the nominal IF picture
carrier greater than the FPLL pull-in capability
(
830.6 kHz to +843.8 kHz or 1674.3 kHz to
+1687.5 kHz), the output reading is undefined. The
AFC lock indication can be taken from the N_H_LOCK
information from the H-sync PLL. The lock occurs
inside a frequency window, which is determined by the
pull-in capability of the FPLL.
saturation
ADC_SAT
256
------------------------- (%)
=
f
IF
f
nom
–
AFC
–
6 750
×
512
---------------------------------- (kHz)
=