
40
S29AL016D
S29AL016D_00_A1_E August 4, 2004
A d v a n c e I n f o r m a t i o n
Absolute Maximum Ratings
Storage Temperature
Plastic Packages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .–65
°
C to +150
°
C
Ambient Temperature
with Power Applied. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .–65
°
C to +125
°
C
Voltage with Respect to Ground
V
CC
(Note 1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .–0.5 V to +4.0 V
A9
,
OE#
,
and
RESET# (Note 2) . . . . . . . . . . . . . . . .–0.5 V to +12.5 V
All other pins (Note 1). . . . . . . . . . . . . . . . . . . . . –0.5 V to V
CC
+0.5 V
Output Short Circuit Current (Note 3). . . . . . . . . . . . . . . . . . . . . . . . 200 mA
Notes:
1. Minimum DC voltage on input or I/O pins is –0.5 V. During voltage transitions, input or I/O pins may overshoot V
SS
to –2.0 V for periods of up to 20 ns. See
Figure 7
. Maximum DC voltage on input or I/O pins is
V
CC
+0.5 V. During
voltage transitions, input or I/O pins may overshoot to V
CC
+2.0 V for periods up to 20 ns. See
Figure 8
.
2. Minimum DC input voltage on pins A9, OE#, and RESET# is -0.5 V. During voltage transitions, A9, OE#, and
RESET# may overshoot V
SS
to –2.0 V for periods of up to 20 ns. See
Figure 7
. Maximum DC input voltage on pin
A9 is +12.5 V which may overshoot to 14.0 V for periods up to 20 ns.
3. No more than one output may be shorted to ground at a time. Duration of the short circuit should not be greater
than one second.
Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a
stress rating only; functional operation of the device at these or any other conditions above those indicated in the op-
erational sections of this data sheet is not implied. Exposure of the device to absolute maximum rating conditions for
Operating Ranges
Industrial (I) Devices
Ambient Temperature (T
A
) . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to +85°C
V
CC
Supply Voltages
V
CC
for standard voltage range . . . . . . . . . . . . . . . . . . . . . . . .2.7 V to 3.6 V
Operating ranges define those limits between which the functionality of the device is
guaranteed.
Figure 7. Maximum Negative
Overshoot Waveform
Figure 8. Maximum Positive Overshoot Waveform
20 ns
20 ns
+0.8 V
–0.5 V
20 ns
–2.0 V
20 ns
V
CC
+2.0 V
V
CC
+0.5 V
20 ns
2.0 V