參數資料
型號: S29GL128N11FFIVH2
廠商: SPANSION LLC
元件分類: PROM
英文描述: 16M X 16 FLASH 3V PROM, 110 ns, PBGA64
封裝: 10 X 13 MM, 1 MM PITCH, LEAD FREE, FBGA-64
文件頁數: 35/74頁
文件大?。?/td> 1593K
代理商: S29GL128N11FFIVH2
38
S29GL-N
S29GL-N_01_A0 May 1, 2006
Da ta
Sh e e t
Figure 10.1 Write Buffer Programming Operation
Notes
1. When Sector Address is specified, any address in the selected sector is acceptable. However, when loading Write-Buffer address
locations with data, all addresses must fall within the selected Write-Buffer Page.
2. DQ7 may change simultaneously with DQ5. Therefore, DQ7 should be verified.
3. If this flowchart location was reached because DQ5= 1, then the device FAILED. If this flowchart location was reached because DQ1= 1,
then the Write to Buffer operation was ABORTED. In either case, the proper reset command must be written before the device can begin
another operation. If DQ1=1, write the Write-Buffer-Programming-Abort-Reset command. if DQ5=1, write the Reset command.
4. See Table 11.1 on page 46 and Table 11.3 on page 48 for command sequences required for write buffer programming.
Write “Write to Buffer”
command and
Sector Address
Write number of addresses
to program minus 1(WC)
and Sector Address
Write program buffer to
flash sector address
Write first address/data
Write to a different
sector address
FAIL or ABORT
PASS
Read DQ15 - DQ0 at
Last Loaded Address
Read DQ15 - DQ0 with
address = Last Loaded
Address
Write next address/data pair
WC = WC - 1
WC = 0 ?
Part of “Write to Buffer”
Command Sequence
Yes
No
Abort Write to
Buffer Operation?
DQ7 = Data?
DQ5 = 1?
DQ1 = 1?
Write to buffer ABORTED.
Must write “Write-to-buffer
Abort Reset” command
sequence to return
to read mode.
(Note 1)
(Note 2)
(Note 3)
相關PDF資料
PDF描述
S29JL032J70TFI213 2M X 16 FLASH 3V PROM, 70 ns, PDSO48
S29PL032J65BFI150 2M X 16 FLASH 3V PROM, 65 ns, PBGA56
S29PL127J70BFI000 8M X 16 FLASH 3V PROM, 70 ns, PBGA80
S29XS064R0PBHW010 4M X 16 FLASH 1.8V PROM, 80 ns, PBGA44
S2C3R-1-12-H 4000 MHz - 12000 MHz RF/MICROWAVE SGL POLE DOUBLE THROW SWITCH, 2 dB INSERTION LOSS
相關代理商/技術參數
參數描述
S29GL128N11FFVR10 制造商:Spansion 功能描述:FLASH PARALLEL 3.3V 128MBIT 16MX8/8MX16 110NS 56TSOP - Trays
S29GL128N11TAI010 制造商:Spansion 功能描述:SPZS29GL128N11TAI010 FLSH MEM EOL161008
S29GL128N11TFA020 制造商:Spansion 功能描述:
S29GL128N11TFI010H 制造商:Spansion 功能描述:
S29GL128N11TFI020 制造商:Spansion 功能描述: 制造商:Spansion 功能描述:Flash - NOR IC 制造商:Spansion 功能描述:NOR Flash, 8M x 16, 56 Pin, Plastic, TSSOP