
3;%(
Data Sheet
3-102
04.2000
5HJLVWHU'HVFULSWLRQ
8SVWUHDP)2$0(QWU\'ZRUG
Bit 31
PAR
Dword parity protection. In normal operation write to 0. Should always
read as 0.
30..27
Unused
It is recommended to initialize with ’0’.
CTSDCID(6:0)
Identifier for Data Collection on terminated / intermediate Segment F5
BR cells. Related enable CTSDCEN in Dword3.
Bit 19
CLOCF2N
1
Indication for a state transition from F5 LOC failure state
to F5 LOC normal state. Set by AOP, must be cleared by
the μP. Reported with interrupt UCSTTR if enabled with
CCCMEN=1 (Dword1).
Bit 18
CLOCD2F
1
Indication for a state transition from F5 LOC defect state
to F5 LOC failure state. Set by AOP, must be cleared by
the μP. Reported with interrupt UCSTTR if enabled with
CCCMEN=1 (Dword1).
Bit 17
CRDIF2N
1
Indication for a state transition from F5 RDI failure state to
F5 RDI normal state. Set by AOP, must be cleared by the
μP. Reported with interrupt UCSTTR if enabled with
CRDIMEN=1 (Dword1).
Bit 16
CRDID2F
1
Indication for a state transition from F5 RDI defect state to
F5 RDI failure state. Set by AOP, must be cleared by the
μP. Reported with interrupt UCSTTR if enabled with
CRDIMEN=1 (Dword1).
Bit 15
CAISF2N
1
Indication for a state transition from F5 AIS failure state to
F5 AIS normal state. Set by AOP, must be cleared by the
μP. Reported with interrupt UCSTTR if enabled with
CAISMEN=1 (Dword1).
Bit 14
CAISD2F
1
Indication for a state transition from F5 AIS defect state to
F5 AIS failure state. Set by AOP, must be cleared by the
μP. Reported with interrupt UCSTTR if enabled with
CAISMEN=1 (Dword1).