參數資料
型號： PCA9541
廠商： NXP Semiconductors N.V.
英文描述： 2-to-1 I2C master selector with interrupt logic and reset
中文描述： 2比1的I2C主機選擇與中斷邏輯和復位
文件頁數： 12/30頁
文件大?。?/td> 279K
代理商： PCA9541
Philips Semiconductors
Product data sheet
PCA9541
2-to-1 I
2
C master selector with interrupt logic and reset
2004 Oct 01
12
Register 2: Interrupt Status Register (B1B0 = 10)
The Interrupt Status Register for both the masters is identical and is described below. Nevertheless, there are physically 2 internal Interrupt
Registers, one for each upstream channel.
When Master 0 reads this register, the internal Interrupt Register 0 will be accessed.
When Master 1 reads this register, the internal Interrupt Register 1 will be accessed.
BIT
7
6
5
4
3
2
1
0
SYMBOL
NMYTEST
MYTEST
0
0
BUSLOST
BUSOK
BUSINIT
INTIN
Table 8.
Register 2
BIT
SYMBOL
READ/
WRITE
DEFAULT
DESCRIPTION
0
INTIN
R only
0
0: No interrupt on interrupt input (INT_IN)
1: Interrupt on interrupt input (INT_IN)
0: No interrupt generated by the bus recovery/initialization function
1
BUSINIT
R only
0
1: Interrupt generated by the bus recovery/initialization function –
recovery/initialization done
0: No interrupt generated by bus sensor function
2
BUSOK
R only
0
1: Interrupt generated by bus sensor function (masked when bus
recovery/initialization requested) – Bus was not idle when the switch
occurred
3
BUSLOST
R only
0
0: No interrupt generated to the previous master when switching to the new
one is initiated
1: Interrupt generated to the previous master when switching to the new
one is initiated
4
NOT USED
R only
0
5
NOT USED
R only
0
6
MYTEST
R only
0
0: No interrupt generated by TESTON bit f (TESTON = 0)
1: Interrupt generated by TESTON bit (TESTON = 1)
7
NMYTEST
R only
0
0: No interrupt generated due to NTESTON bit from the other master
(NTESTON = 0 from the other master)
1: Interrupt generated due to TESTON bit from the other master
(NTESTON = 1 from the other master)
NOTES:
1. Interrupt on a master is cleared after TESTON bit is cleared the same master or NTESTON bit is cleared by the other master.
2. If the interrupt condition remains on INT_IN after the Read sequence, another interrupt will be generated (if the interrupt has not been
masked)
3. Default values are the same for PCA9541/01, PCA9541/02 and PCA9541/03
4. Reading the Interrupt Status Register does not clear the MYTEST, NMYTEST or the INTIN bits. They are cleared if:
–
INT_IN lines goes HIGH for INTIN bit
–
TESTON bit is cleared for MYTEST bit
–
NTESTON bit is cleared for NMYTEST bit
5. BUSINIT, BUSOK and BUSLOST bits in the Interrupt Status Register gets cleared after a Read of the same register is done. Precisely, the
register gets cleared on the second clock pulse during the read operation.
相關PDF資料
PDF描述
PCA9542 2-channel IIC multiplexer and interrupt controller(2通道IIC多路復用器和中斷控制器)
PCA9542PW 2-channel I2C multiplexer and interrupt controller
PCA9542PWDH 2-channel I2C multiplexer and interrupt controller
PCA9543 2-channel I2C switch with interrupt logic and reset
PCA9543D 2-channel I2C switch with interrupt logic and reset
相關代理商/技術參數
參數描述
PCA9541_08 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:2-to-1 I2C-bus master selector with interrupt logic and reset
PCA9541_09 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:2-to-1 I2C-bus master selector with interrupt logic and reset
PCA9541A 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:2-to-1 I2C-bus master selector with interrupt logic and reset
PCA9541ABS/01 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:2-to-1 I2C-bus master selector with interrupt logic and reset
PCA9541ABS/01,118 功能描述:I2C 接口集成電路 2-to-1 I2C-bus master selector RoHS:否 制造商:NXP Semiconductors 電源電壓-最大:5.5 V 電源電壓-最小:2.3 V 最大工作頻率:400 KHz 最大工作溫度:+ 85 C 封裝 / 箱體:TSSOP-16
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*