![](http://datasheet.mmic.net.cn/190000/MT46H256M32LFCM-5-A_datasheet_14940763/MT46H256M32LFCM-5-A_40.png)
Output Drive Characteristics
Table 13: Target Output Drive Characteristics (Full Strength)
Notes 1–2 apply to all values; characteristics are specified under best and worst process variations/conditions
Voltage (V)
Pull-Down Current (mA)
Pull-Up Current (mA)
Min
Max
Min
Max
0.00
0.10
2.80
18.53
–2.80
–18.53
0.20
5.60
26.80
–5.60
–26.80
0.30
8.40
32.80
–8.40
–32.80
0.40
11.20
37.05
–11.20
–37.05
0.50
14.00
40.00
–14.00
–40.00
0.60
16.80
42.50
–16.80
–42.50
0.70
19.60
44.57
–19.60
–44.57
0.80
22.40
46.50
–22.40
–46.50
0.85
23.80
47.48
–23.80
–47.48
0.90
23.80
48.50
–23.80
–48.50
0.95
23.80
49.40
–23.80
–49.40
1.00
23.80
50.05
–23.80
–50.05
1.10
23.80
51.35
–23.80
–51.35
1.20
23.80
52.65
–23.80
–52.65
1.30
23.80
53.95
–23.80
–53.95
1.40
23.80
55.25
–23.80
–55.25
1.50
23.80
56.55
–23.80
–56.55
1.60
23.80
57.85
–23.80
–57.85
1.70
23.80
59.15
–23.80
–59.15
1.80
–
60.45
–
–60.45
1.90
–
61.75
–
–61.75
Notes: 1. Based on nominal impedance of
25Ω (full strength) at VDDQ/2.
2. The full variation in driver current from minimum to maximum, due to process, voltage,
and temperature, will lie within the outer bounding lines of the I-V curves.
2Gb: x16, x32 Mobile LPDDR SDRAM
Output Drive Characteristics
PDF: 09005aef83a73286
2gb_ddr_mobile_sdram_t69m.pdf - Rev. M 11/10 EN
40
Micron Technology, Inc. reserves the right to change products or specifications without notice.
2009 Micron Technology, Inc. All rights reserved.