參數資料
型號： MC68HC05C9ECP
廠商： FREESCALE SEMICONDUCTOR INC
元件分類： 微控制器/微處理器
英文描述： 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDIP40
封裝： PLASTIC, DIP-40
文件頁數： 24/106頁
文件大?。?/td> 659K
代理商： MC68HC05C9ECP
Central Processor Unit (CPU)
MC68HC05C9E Advance Information Data Sheet, Rev. 0.1
24
Freescale Semiconductor
3.2.1 Accumulator (A)
The accumulator is a general-purpose 8-bit register used to hold operands and results of arithmetic
calculations or data manipulations.
3.2.2 Index Register (X)
The index register is an 8-bit register used for the indexed addressing value to create an effective
address. The index register may also be used as a temporary storage area.
3.2.3 Program Counter (PC)
The program counter is a 14-bit register that contains the address of the next byte to be fetched.
3.2.4 Stack Pointer (SP)
The stack pointer contains the address of the next free location on the stack. During an MCU reset or the
reset stack pointer (RSP) instruction, the stack pointer is set to location $0FF. The stack pointer is then
decremented as data is pushed onto the stack and incremented as data is pulled from the stack.
When accessing memory, the eight most significant bits are permanently set to 00000011. These eight
bits are appended to the six least significant register bits to produce an address within the range of $00FF
to $00C0. Subroutines and interrupts may use up to 64 (decimal) locations. If 64 locations are exceeded,
the stack pointer wraps around and loses the previously stored information. A subroutine call occupies
two locations on the stack; an interrupt uses five locations.
3.2.5 Condition Code Register (CCR)
The CCR is a 5-bit register in which four bits are used to indicate the results of the instruction just
executed, and the fifth bit indicates whether interrupts are masked. These bits can be individually tested
by a program, and specific actions can be taken as a result of their state. Each bit is explained here.
Half Carry (H)
This bit is set during ADD and ADC operations to indicate that a carry occurred between bits 3 and 4.
Interrupt (I)
When this bit is set, the timer, serial communications interface (SCI), serial peripheral interface (SPI),
and external interrupt are masked (disabled). If an interrupt occurs while this bit is set, the interrupt is
latched and processed as soon as the interrupt bit is cleared.
Negative (N)
When set, this bit indicates that the result of the last arithmetic, logical, or data manipulation was
negative.
Zero (Z)
When set, this bit indicates that the result of the last arithmetic, logical, or data manipulation was 0.
Carry/Borrow (C)
When set, this bit indicates that a carry or borrow out of the arithmetic logical unit (ALU) occurred
during the last arithmetic operation. This bit is also affected during bit test and branch instructions and
during shifts and rotates.
相關PDF資料
PDF描述
MC68HC05CC2B 8-BIT, MROM, 4.2 MHz, MICROCONTROLLER, PDIP42
MC68HC05CJ4FB 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PQFP44
MC68HC705CJ4FB 8-BIT, OTPROM, 2.1 MHz, MICROCONTROLLER, PQFP44
MC68HC05E0FN 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PQCC68
MC68HC05E5P 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDIP28
相關代理商/技術參數
參數描述
MC68HC05CT4FB 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:General Release Specification
MC68HC05CT4FN 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:General Release Specification
MC68HC05D9 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:8-bit microcomputer with PWM outputs and LED drive
MC68HC05E0 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:High-density complementary metal oxide semiconductor (HCMOS) microcontroller unit
MC68HC05E0FN 制造商:未知廠家 制造商全稱:未知廠家 功能描述:8-Bit Microcontroller
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*