參數資料
型號： M37920F8CHP
元件分類： 微控制器/微處理器
英文描述： 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP100
封裝： 14 X 14 MM, 0.50 MM PITCH, PLASTIC, LQFP-100
文件頁數： 136/155頁
文件大?。?/td> 1274K
代理商： M37920F8CHP
81
M37920F8CGP, M37920F8CHP, M37920FCCGP
M37920FCCHP, M37920FGCGP, M37920FGCHP
PRELIMINAR
Y
Notice:
This
is not
a final
specification.
Some
parametric
limits
are
subject
to change.
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER FLASH MEMORY VERSION
MITSUBISHI MICROCOMPUTERS
Priority
Priorities are assigned to all DMA channels. Either the fixed or rota-
tive priority can be selected. When bit 0 (priority select bit) of the
DMAC control register is cleared to “0”, the fixed priority is selected.
Note that the fixed priority is automatically selected after the reset
removal. In the fixed priority, the channels are given fixed priorities
and DMA transfer is executed in the order of priority. From high to
low, the priorities are assigned to channels 0, 1, 2, and 3. As indi-
cated in Figure 76, the priorities are detected at each cycle in the
cycle steal transfer mode or when the first DMA request is accepted
in the burst transfer mode.
When bit 0 of the DMAC control register is set to “1”, the rotative pri-
Fig. 75 Rotative priority
Channel 0
Channel 1
Channel 3
Channel 1
Channel 2
Channel 0
Channel 2
Channel 3
Channel 1
Channel 3
Channel 0
Channel 2
(1) Before start of transfer (after reset removal)
(2) After completion of channel 0’s transfer
(3) After completion of channel 2’s transfer
ority is selected. From high to low, the initial priorities are assigned
to channels 0, 1, 2, and 3 as is the case with the fixed priority. When
a DMA transfer for one channel is normally terminated with the rota-
tive priority employed, the priorities are rotated in such a manner that
the channel, for which transfer has just been completed, has the low-
est priority. For example, when channel 0’s transfer is normally ter-
minated as shown in Figure 75, the priorities are rotated upon
completion of transfer so that the new priorities are, in decreasing
order, channel 1, channel 2, channel 3, and channel 0. The priorities
remain unchanged when DMA transfer is forcibly terminated by pin
TC’s input or the DMA enable bit clearance, etc.
相關PDF資料
PDF描述
M37920F8CGP 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP100
M38039MFL-XXXHP 8-BIT, MROM, 16.8 MHz, MICROCONTROLLER, PQFP64
M38039MFL-XXXSP 8-BIT, MROM, 16.8 MHz, MICROCONTROLLER, PDIP64
M38039MFL-XXXWG 8-BIT, MROM, 16.8 MHz, MICROCONTROLLER, PBGA64
M38039FFLHP 8-BIT, FLASH, 16.8 MHz, MICROCONTROLLER, PQFP64
相關代理商/技術參數
參數描述
M37920FCCGP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER FLASH MEMORY VERSION
M37920FCCHP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER FLASH MEMORY VERSION
M37920FGCGP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER FLASH MEMORY VERSION
M37920FGCHP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER FLASH MEMORY VERSION
M37920S4CGP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:16 BIT CMOS MICROCOMPUTER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*