參數資料
型號： M30240M5-XXXFP
元件分類： 微控制器/微處理器
英文描述： 16-BIT, MROM, 12 MHz, MICROCONTROLLER, PQFP80
封裝： 0.80 MM PITCH, PLASTIC, QFP-80
文件頁數： 91/139頁
文件大?。?/td> 1453K
代理商： M30240M5-XXXFP
55
Mitsubishi microcomputers
M30240 Group
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Specifications REV. G
Specifications in this manual are tentative and subject to change
Universal Serial Bus
data will be in the FIFO. For this case, because the SETUP_END bit is set near the beginning of the packet
when the SETUP PID is encountered and the OUT_PKT_RDY bit is set at the end of the packet, the value
read from EP0IN_CSR in the USB functional interrupt routine may only show that the SETUP_END flag as “1”
instead of both the SETUP_END and OUT_PKT_RDY bits.
EP0CSR6 and EP0CSR7:
These bits are used to clear EP0CSR0 and EP0CSR5 respectively. Writing a “1” to these bits clears the cor-
responding register bit.
Figure 1.44: USB Endpoint 0 CSR
1.2.18.4.12 USB Endpoint 0 MAXP Register
The USB Endpoint 0 MAXP Register, shown in Figure 1.45, indicates the maximum packet size (MAXP) of
Endpoint 0 IN/OUT packet. The default value for Endpoint 0 MAXP is 8 bytes.
Figure 1.45: USB Endpoint 0 MAXP
USB Endpoint 0 Control and Status Register (Note 5)
Symbol
Address
When reset
EP0CS
031116
0016
Bit name
Bit symbol
b7
b6
b5
b4
b3
b2
b1
b0
Function
W
R
EP0CSR0
EP0CSR1
EPOCSR2
EPOCSR3
EP0CSR4
EPOCSR5
EP0CSR6
EPOCSR7
OUT_PKT_RDY Flag
IN_PKT_RDY Bit
SEND_STALL Bit
DATA_END Bit
FORCE_STALL Flag
SETUP_END Flag
SERVICED_OUT_PKY_RDY Bit
SERVICED_SETUP_END Bit
0 : Not ready
1 : Ready
0 : Not ready
1 : Ready
0 : No action
1 : Stall Endpoint 0 by CPU
0 : No action
1 : Last packet transferred from/to FIFO
0 : No action
1 : Stall Endpoint 0 by USB FCU
0 : No action
1 : Control transfer ended before specific
length of data transferred during data phase
0 : No change
1 : Clear the OUT_PKT_RDY bit (EPOCSR0)
0 : No change
1 : Clear the STUP-END bit (EP0CSR5)
0 0
Note 1: Read only
Note 2: Write "1" only or Read
Note 3: Write "0" only or Read
Note 4: Write only - Read "0"
Note 5: Refer to Section 1.5.5 "Programming Notes" for this register
Note 1
Note 2
Note 3
Note 2
Note 4
USB Endpoint 0 MAXP Register
Symbol
Address
When reset
EP0MP
031316
0816
Bit name
Bit symbol
b7
b6
b5
b4
b3
b2
b1
b0
EP0MXP0 to
EP0MXP5
Function
W
R
Maximum packet size (MAXP)
of Endpoint 0 IN/OUT packet
Reserved
Must always be set to "0"
0 0
相關PDF資料
PDF描述
M30240M6-XXXXFP 16-BIT, MROM, 12 MHz, MICROCONTROLLER, PQFP80
M30240ECFP 16-BIT, OTPROM, 12 MHz, MICROCONTROLLER, PQFP80
M30240M5-XXXXFP 16-BIT, MROM, 12 MHz, MICROCONTROLLER, PQFP80
M30240M6-XXXXFP 16-BIT, OTPROM, MICROCONTROLLER, PQFP80
M30240ECFP 16-BIT, OTPROM, MICROCONTROLLER, PQFP80
相關代理商/技術參數
參數描述
M30240M6 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M30240M6-XXXFP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M30240M7 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M30240M7-XXXFP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M30240M8 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*