參數資料
型號： LM1253AN
廠商： NATIONAL SEMICONDUCTOR CORP
元件分類： 畫面疊加
英文描述： Monolithic Triple 180 MHz I2C CRT Pre-amp With Integrated Analog On Screen Display (OSD) Generator
中文描述： ON-SCREEN DISPLAY IC, PDIP28
封裝： 0.600 INCH, PLASTIC, DIP-28
文件頁數： 13/57頁
文件大小： 1621K
代理商： LM1253AN
Pin Descriptions
(Continued)
Pin 20—Digital Supply
5V supply for the OSD section of
the LM1253A. Pins 19 and 20 should be tied together under
normal operating conditions.
Pin 21—Analog Supply
5V supply for the video section of
the preamp. A 0.1 μF capacitor should be connected be-
tween pin 21 and pin 22, as close as possible to the
LM1253A.
Pin 22—Analog Ground
Ground for the video section of
the LM1253A. All ground pins of the LM1253A should be
connected together by a ground plane under the LM1253A.
See Figure 31 which shows a sample layout.
Pin 23, 24, and 25—Green, Red, and Blue Video Out
These pins output the red, green, and blue video information
in the VideoPlex format. These pins are connected to the
LM2453 using as short of traces as possible. An inductor
should be in series with the trace between the preamp and
CRT driver. The value of this inductor depends on the board
layout. Figures 29, 30 show the external schematic of pins
23, 24, and 25, Figure 21 shows the internal schematic.
Pin 26—V
REF
Out
The voltage that the VideoPlex signal is
referenced to is output on this pin. A 0.1 μF capacitor should
be connected between this pin and ground and be located
close to the LM1253A. This pin is connected to the V
REF
pin
of the LM2453. A 0.1 μF capacitor also needs to be con-
nected very close to the LM2453. A 100 μF capacitor should
also be connected to this trace. Figures 29, 30 show the ex-
ternal schematic of pin 26, Figure 22 shows the internal
schematic.
Pin 27—Analog Ground
Ground for the band gap refer-
ence section of the LM1253A. All ground pins of the
LM1253A should be connected together by a ground plane
under the LM1253A. See Figure 31 which shows a sample
layout.
Pin 28— Analog Supply
5V supply for the band gap refer-
ence section of the preamp. A 0.1 μF capacitor should be
connected between pin 27 and pin 28, as close as possible
to the LM1253A. See Figure 31 which shows a sample lay-
out.
Input/Output Schematics
DS101265-14
FIGURE 11. Pin 1 (R
EXT
V
REF
)
DS101265-15
FIGURE 12. Pin 2 (V Blank Out)
DS101265-16
FIGURE 13. Pin 3 (V
REF
Cap)
L
www.national.com
13
相關PDF資料
PDF描述
LM1253A Monolithic Triple 180 MHz I2C CRT Pre-amp With Integrated Analog On Screen Display (OSD) Generator
LM1262 200 MHz I2C Compatible RGB Video Amplifier System with OSD and DACs
LM1262NA 200 MHz I2C Compatible RGB Video Amplifier System with OSD and DACs
LM1267NA 150 MHz I2C Compatible RGB Video Amplifier System with OSD and DACs
LM1267 150 MHz I2C Compatible RGB Video Amplifier System with OSD and DACs
相關代理商/技術參數
參數描述
LM-1256 制造商:ROHM 制造商全稱:Rohm 功能描述:16 x 16 matrix displays
LM-1256_1 制造商:ROHM 制造商全稱:Rohm 功能描述:16】16 matrix displays
LM-1256LB1 制造商:ROHM 制造商全稱:Rohm 功能描述:16】16 matrix displays
LM125AN 制造商:NSC 制造商全稱:National Semiconductor 功能描述:VOLTAGE REGULATORS
LM125H 制造商: 功能描述: 制造商:undefined 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*