參數資料
型號： FTS64K
廠商： 飛思卡爾半導體(中國)有限公司
英文描述： 50/MDR/RECP/VERT PRS FIT/M2.6/SCW/30 MIN
中文描述： 64K的快閃記憶體字節
文件頁數： 25/44頁
文件大?。?/td> 401K
代理商： FTS64K
25
The CCIF flag indicates that there are no more commands pending. The CCIF flag is cleared when
CBEIFisclearandsetsautomaticallyuponcompletionofallactiveandpendingcommands.TheCCIF
flag does not set when an active commands completes and a pending command is fetched from the
command buffer. Writing to the CCIF flag has no effect. This bit, CCIF, is used together with the
enable bit CCIE, to generate the interrupt request (see also
Figure 6-1
).
1 = All commands are completed.
0 = Command in progress.
PVIOL — Protection Violation.
The PVIOL flag indicates an attempt was made to program or erase an address in a protected Flash
memory area. The PVIOL flag is cleared by writing a “1” to PVIOL. Writing a “0” to the PVIOL flag
has no effect on PVIOL. While PVIOL is set it is not possible to launch another command.
1 = A protection violation has occurred.
0 = No failure.
ACCERR — Flash Access Error.
The ACCERR flag indicates an illegal access to the selected Flash array. This can be either a violation
of the command sequence, issuing an illegal command (illegal combination of the CMDBx bits in the
FCMDregister)ortheexecutionofaCPUSTOPinstructionwhileacommandisexecuting(CCIF=0).
The ACCERR flag is cleared by writing a “1” to ACCERR. Writing a “0” to the ACCERR flag has no
effect on ACCERR. While ACCERR is set it is not possible to launch another command.
1 = Access error has occurred.
0 = No failure.
BLANK — Array has been verified as erased.
The BLANK flag indicates that an Erase Verify command has checked the Flash block and found it to
be blank. The BLANK flag is cleared by hardware when CBEIF is cleared as part of a new valid
command sequence. Writing to the BLANK flag has no effect on BLANK.
1 = Flash block verifies as erased.
0=IfanEraseVerifycommandhasbeenrequested,andtheCCIFflagisset,thenazeroinBLANK
indicates the Flash is not erased.
3.3.7 FCMD — Flash Command Register
The FCMD register defines the Flash commands.
Figure 3-8 Flash Command Buffer and Register (FCMD)
Register address BASE + $106
7
R
0
W
Reset:
0
6
5
4
0
3
0
2
1
0
0
CMDB6
CMDB5
CMDB2
CMDB0
0
0
0
0
0
0
0
F
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
n
.
相關PDF資料
PDF描述
FTT1010-M Frame Transfer CCD Image Sensor
FTT1010M Frame Transfer CCD Image Sensor
FU-675PDF-V1M25A Optoelectronic
FU-675PDF-V1M26A Optoelectronic
FU-675PDF-V1M27A Optoelectronic
相關代理商/技術參數
參數描述
FTS900 制造商:Fluke Networks 功能描述:FIBER QUICKMAP WITH VFL 制造商:Fluke Networks 功能描述:FIBER QUICKMAP KIT; Kit Contents:Fibre QuickMap, SC/ LC Hybrid Test Reference Cords, VisiFault VFL; Primary Product 1:Fibre QuickMap; Primary Product 2:SC/LC Test Reference Cord; Primary Product 3:VisiFault VFL ;RoHS Compliant: NA
FTSC421502459 制造商: 功能描述: 制造商:undefined 功能描述:
FT-SFM2 制造商:Panasonic Electric Works 功能描述:THRU-BEAM TYPE FIBER 制造商:Panasonic Electric Works 功能描述:OPTO SENSORN FT-SNFM2
FT-SFM2L 制造商:Panasonic Electric Works 功能描述:FIBER SENSOR2.5MM DIA. THRU. W/ LENS LO 制造商:Panasonic Electric Works 功能描述:THRU-BEAM TYPE FIBER
FT-SFM2SV2 制造商:Panasonic Electric Works 功能描述:FIBER SENSOR2.5MM DIA. THRU. W/ 1.5MM 制造商:Panasonic Electric Works 功能描述:SENSOR, FIBRE OPTIC, THRUBEAM, 550MM; Fiber Optic Sensor Type:Thrubeam ;RoHS Compliant: Yes 制造商:Panasonic Electric Works 功能描述:THRU-BEAM TYPE FIBER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*