參數資料
型號： DS3148
廠商： Maxim Integrated Products
文件頁數： 68/89頁
文件大?。?/td> 0K
描述： IC 8CH DS3/3 FRAMER 349-BGA
產品培訓模塊： Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
標準包裝： 1
控制器類型： DS3/E3 調幀器
接口： LIU
電源電壓： 3.135 V ~ 3.465 V
電流 - 電源： 640mA
工作溫度： -40°C ~ 85°C
安裝類型： 表面貼裝
封裝/外殼： 349-BGA 裸露焊盤
供應商設備封裝： 349-HCBGA（27x27）
包裝： 托盤
DS3146/DS3146/DS31412 6-/8-/12-Channel DS3/E3 Framers
70 of 89
9. JTAG INFORMATION
The DS3146, DS3148, and DS31412 support the standard instruction codes SAMPLE/PRELOAD, BYPASS, and
EXTEST. Optional public instructions included are HIGHZ, CLAMP, and IDCODE. See the JTAG block diagram in
Figure 9-1. The device contains the following items, which meet the requirements set by the IEEE 1149.1 Standard
Test Access Port (TAP) and Boundary Scan Architecture:
Test Access Port (TAP)
TAP Controller
Instruction Register
Bypass Register
Boundary Scan Register
Device Identification Register
The Test Access Port has the necessary interface pins, namely JTCLK, JTDI, JTDO, and JTMS, and the optional
JTRST input. Details on these pins can be found in Section 5.6. Refer to IEEE 1149.1-1990, IEEE 1149.1a-1993,
and IEEE 1149.1b-1994 for details about the Boundary Scan Architecture and the Test Access Port.
Figure 9-1. JTAG Block Diagram
9.1 JTAG TAP Controller State Machine
This section covers the operation of the TAP controller state machine. See Figure 9-2 for details on each of the
states described below. The TAP controller is a finite state machine that responds to the logic level at JTMS on the
rising edge of JTCLK.
Test-Logic-Reset. When
JTRST is changed from low to high, the TAP controller starts in the Test-Logic-Reset
state, and the instruction register is loaded with the IDCODE instruction. All system logic and I/O pads on the
device operate normally.
Run-Test-Idle. Run-Test-Idle is used between scan operations or during specific tests. The instruction register and
test register remain idle.
BOUNDARY
SCAN
REGISTER
IDENTIFICATION
REGISTER
BYPASS
REGISTER
INSTRUCTION
REGISTER
TEST ACCESS PORT
CONTROLLER
MU
X
SELECT
TRI-STATE
JTDI
10k
W
JTMS
10k
W
JTCLK
JTRST
10k
W
JTDO
相關PDF資料
PDF描述
DS21FT42 IC FRAMER T1 4X3 12CH 300-BGA
V375C24M75BL3 CONVERTER MOD DC/DC 24V 75W
V375C24M75BL2 CONVERTER MOD DC/DC 24V 75W
DS21FF42N+ IC FRAMER T1 4X4 16CH 300-BGA
DS21FT42N IC FRAMER T1 4X3 12CH IND 300BGA
相關代理商/技術參數
參數描述
DS3148N 功能描述:網絡控制器與處理器 IC 8 Port DS3/E3 Framer RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS315 制造商:Hubbell Wiring Device-Kellems 功能描述:SWITCH, DECO SER, 3W, 15A 120/277V, BR
DS3150 制造商:MAXIM 制造商全稱:Maxim Integrated Products 功能描述:3.3V, DS3/E3/STS-1 Line Interface Unit
DS3150DK 功能描述:網絡開發工具 DS3150 Dev Kit RoHS:否 制造商:Rabbit Semiconductor 產品:Development Kits 類型:Ethernet to Wi-Fi Bridges 工具用于評估:RCM6600W 數據速率:20 Mbps, 40 Mbps 接口類型:802.11 b/g, Ethernet 工作電源電壓:3.3 V
DS3150G 功能描述:IC LIU T3/E3/STS-1 49-BGA RoHS:否 類別:集成電路 (IC) >> 接口 - 驅動器，接收器，收發器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:25 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:4.5 V ~ 5.5 V 安裝類型:通孔 封裝/外殼:16-DIP（0.300"，7.62mm） 供應商設備封裝:16-PDIP 包裝:管件
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*