參數資料
型號： DS3148
廠商： Maxim Integrated Products
文件頁數： 28/89頁
文件大?。?/td> 0K
描述： IC 8CH DS3/3 FRAMER 349-BGA
產品培訓模塊： Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
標準包裝： 1
控制器類型： DS3/E3 調幀器
接口： LIU
電源電壓： 3.135 V ~ 3.465 V
電流 - 電源： 640mA
工作溫度： -40°C ~ 85°C
安裝類型： 表面貼裝
封裝/外殼： 349-BGA 裸露焊盤
供應商設備封裝： 349-HCBGA（27x27）
包裝： 托盤
DS3146/DS3146/DS31412 6-/8-/12-Channel DS3/E3 Framers
34 of 89
Bit 3: DS3/E3 Transmit Alarm Indication Signal (TAIS). When this bit is logic 1 in DS3 mode, the transmitter
generates DS3 AIS, which is a properly F-bit and M-bit framed 1010... data pattern with both X bits set to 1, all C
bits set to 0, and the proper P bits. When this bit is logic 1 in E3 mode, the transmitter generates an unframed all-
ones pattern. When this bit is logic 0, normal data is transmitted.
0 = do not transmit AIS
1 = transmit AIS
Bit 4: DS3/E3 Transmit Remote Alarm Indication (TRAI). When this bit is logic 1 in DS3 mode, both X bits of
each DS3 frame are set to logic 0. When this bit is logic 1 in E3 mode, the RAI bit (bit 11 of each E3 frame) is set to
logic 1. When this bit is logic 0 in DS3 mode, both X bits are set to logic 1. When this bit is logic 0 in E3 mode, the
RAI bit is set to logic 0.
0 = do not transmit RAI
1 = transmit RAI
Bit 5: Transmit DS3 Idle Signal Enable (T3IDLE). When this bit is logic 1 in DS3 mode, the transmitter generates
the DS3 idle signal instead of the normal transmit data. The DS3 idle signal is defined as a normally DS3 framed
pattern (i.e., with the proper F bits and M bits along with the proper P bits) where the information bit fields are
completely filled with a data pattern of 1100..., the C bits in Subframe 3 are set to logic 0, and both X bits are set to
logic 1. In C-Bit Parity mode, the PMDL and FEAC channels are still enabled. This bit is ignored in the E3 mode.
0 = do not transmit DS3 idle signal
1 = transmit DS3 idle signal
Bits 6, 7: E3 National Bit Control (E3SnC[1:0]). These bits determine the source of the E3 National bit (Sn). On
the receive side, the Sn bit is always routed to the T3E3IR register as well as the HDLC controller and the FEAC
controller. These bits are ignored in DS3 mode.
E3SnC1
E3SnC0
SOURCE OF THE E3 NATIONAL BIT (Sn)
0
Force the Sn bit to logic 1
0
1
Source the Sn bit from the HDLC controller
1
0
Source the Sn bit from the FEAC controller
1
Force the Sn bit to logic 0
相關PDF資料
PDF描述
DS21FT42 IC FRAMER T1 4X3 12CH 300-BGA
V375C24M75BL3 CONVERTER MOD DC/DC 24V 75W
V375C24M75BL2 CONVERTER MOD DC/DC 24V 75W
DS21FF42N+ IC FRAMER T1 4X4 16CH 300-BGA
DS21FT42N IC FRAMER T1 4X3 12CH IND 300BGA
相關代理商/技術參數
參數描述
DS3148N 功能描述:網絡控制器與處理器 IC 8 Port DS3/E3 Framer RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS315 制造商:Hubbell Wiring Device-Kellems 功能描述:SWITCH, DECO SER, 3W, 15A 120/277V, BR
DS3150 制造商:MAXIM 制造商全稱:Maxim Integrated Products 功能描述:3.3V, DS3/E3/STS-1 Line Interface Unit
DS3150DK 功能描述:網絡開發工具 DS3150 Dev Kit RoHS:否 制造商:Rabbit Semiconductor 產品:Development Kits 類型:Ethernet to Wi-Fi Bridges 工具用于評估:RCM6600W 數據速率:20 Mbps, 40 Mbps 接口類型:802.11 b/g, Ethernet 工作電源電壓:3.3 V
DS3150G 功能描述:IC LIU T3/E3/STS-1 49-BGA RoHS:否 類別:集成電路 (IC) >> 接口 - 驅動器，接收器，收發器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:25 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:4.5 V ~ 5.5 V 安裝類型:通孔 封裝/外殼:16-DIP（0.300"，7.62mm） 供應商設備封裝:16-PDIP 包裝:管件
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*