- 您現在的位置：買賣IC網 > PDF目錄379183 > DS2482-800 Eight-Channel 1-Wire Master PDF資料下載
參數資料
| 型號： | DS2482-800 |
| 英文描述： | Eight-Channel 1-Wire Master |
| 中文描述： | 八通道1-Wire主控制器 |
| 文件頁數： | 14/22頁 |
| 文件大?。?/td> | 261K |
| 代理商： | DS2482-800 |
DS2482-800: Eight-Channel 1-Wire Master
14 of 22
1-Wire Read Byte
Command Code
Command Parameter
96h
None
Generates eight read data time slots on the selected 1-Wire IO channel
and stores result in the Read Data Register.
To read data from a 1-Wire IO channel; equivalent to executing eight 1-
Wire Single Bit commands with V = 1 (write 1 time slot), but faster due to
less I2C traffic.
1-Wire activity must have ended before the DS2482 can process this
command.
Command code will not be acknowledged if 1WB = 1 at the time the
command code is received and the command will be ignored.
8 × t
SLOT
+ maximum 262.5ns, counted from the falling SCL edge of the
command code acknowledge bit.
Begins maximum 262.5ns after the falling SCL edge of the command
code acknowledge bit.
Status Register (for busy polling)
NOTE
: To read the data byte received from the 1-Wire IO channel, issue
the Set Read Pointer command and select the Read Data Register. Then
access the DS2482 in read mode.
1WB (set to 1 for 8 × t
SLOT
)
1WS, APU apply
Description
Typical Use
Restriction
Error Response
Command Duration
1-Wire Activity
Read Pointer Position
Status Bits Affected
Configuration Bits Affected
1-Wire Triplet
Command Code
Command Parameter
78h
Direction Byte
Generates three times slots, two read-time slots and one-write time slot, at
the selected 1-Wire IO channel. The type of write-time slot depends on the
result of the read-time slots and the direction byte.
The direction byte determines the type of write-time slot if both read-time
slots are 0 (a typical case). In this case the DS2482 will generate a write-1
time slot if V = 1 and a write-0 time slot if V = 0.
If the read-time slots are 0 and 1, there will follow a write 0 time slot.
If the read-time slots are 1 and 0, there will follow a write 1 time slot.
If the read-time slots are both 1 (error case), the subsequent write time
slot will be a write 1.
To perform a 1-Wire Search ROM sequence; a full sequence requires this
command to be executed 64 times to identify and address one device.
1-Wire activity must have ended before the DS2482 can process this
command.
Command code and direction byte will not be acknowledged if 1WB = 1 at
the time the command code is received and the command will be ignored.
3 × t
SLOT
+ maximum 262.5ns, counted from the falling SCL edge of the
first bit (MS bit) of the direction byte.
Begins maximum 262.5ns after the falling SCL edge of the MS bit of the
direction byte.
Status Register (for busy polling)
1WB (set to 1 for 3 × t
SLOT
)
SBR is updated at the first t
MSR
TSB and DIR are updated at the second t
MSR
(i.e., at t
SLOT
+ t
MSR
)
1WS, APU apply
Description
Typical Use
Restriction
Error Response
Command Duration
1-Wire Activity
Read Pointer Position
Status Bits Affected
Configuration Bits Affected
相關PDF資料 |
PDF描述 |
|---|---|
| DS2482-100 | Single-Channel 1-Wire Master |
| DS2482S-100 | Single-Channel 1-Wire Master |
| DS2482S-800 | Eight-Channel 1-Wire Master |
| DS2502-E48 | 48-Bit Node Address Chip |
| DS26401 | Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| DS2482-800_12 | 制造商:MAXIM 制造商全稱:Maxim Integrated Products 功能描述:8-Channel 1-Wire Master |
| DS2482S-100 | 功能描述:接口 - 專用 RoHS:否 制造商:Texas Instruments 產品類型:1080p60 Image Sensor Receiver 工作電源電壓:1.8 V 電源電流:89 mA 最大功率耗散: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:BGA-59 |
| DS2482S-100/R | 制造商:DALLAS 制造商全稱:Dallas Semiconductor 功能描述:Single-Channel 1-Wire Master |
| DS2482S-100/T | 制造商:DALLAS 制造商全稱:Dallas Semiconductor 功能描述:Single-Channel 1-Wire Master |
| DS2482S-100/T&R | 功能描述:接口 - 專用 RoHS:否 制造商:Texas Instruments 產品類型:1080p60 Image Sensor Receiver 工作電源電壓:1.8 V 電源電流:89 mA 最大功率耗散: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:BGA-59 |
發布緊急采購，3分鐘左右您將得到回復。