參數資料
型號： CY7C9689-AI
廠商： CYPRESS SEMICONDUCTOR CORP
元件分類： 微控制器/微處理器
英文描述： TAXI Compatible HOTLink Transceiver
中文描述： 1 CHANNEL(S), 200M bps, LOCAL AREA NETWORK CONTROLLER, PQFP100
封裝： PLASTIC, TQFP-100
文件頁數： 10/48頁
文件大小： 1009K
代理商： CY7C9689-AI
CY7C9689
10
Control Signals
71
CE
TTL input sampled on
TXCLK
|
, RXCLK
|
, or
REFCLK
|
Chip Enable Input. Active LOW.
When CE is asserted and sampled LOW by RXCLK, the Receive FIFO status
flags are driven to their active states. When this input is deasserted and sampled
by RXCLK, the Receive FIFO status flags are placed in a High-Z state.
When CE has been sampled LOW and RXEN changes from deasserted to
asserted and is sampled by RXCLK, the RXSC/D, RXDATA[7:0], RXDATA[9:8]/
RXCMD[2:3] and VLTN output drivers are enabled and go to their driven levels.
These pins remain driven until RXEN is sampled deasserted.
When the Transmit FIFO is enabled (FIFOBYP is HIGH), and CE is asserted
and sampled by TXCLK, the Transmit FIFO status flags are driven to their active
states. When this input is deasserted and sampled by TXCLK, the Transmit
FIFO status flags are placed in a High-Z state.
When the Transmit FIFO is bypassed (FIFOBYP is LOW), and CE is asserted
and sampled by REFCLK, the Transmit FIFO status flags are driven to their
active states. When this input is deasserted and sampled by REFCLK, the
Transmit FIFO status flags are placed in a High-Z state.
When the Transmit FIFO is enabled (FIFOBYP is HIGH), CE has been sampled
LOW, and TXEN changes from deasserted to asserted and is sampled by
TXCLK, the TXSC/D, TXDATA[7:0], TXDATA[9:8]/RXCMD[2:3], and
TXCMD[1:0] inputs are sampled and passed to the Transmit FIFO. These inputs
are sampled on all consecutive TXCLK cycles until TXEN is sampled
deasserted.
When the Transmit FIFO is bypassed (FIFOBYP is LOW), CE has been sampled
LOW, and TXEN changes from deasserted to asserted and is sampled by
REFCLK, the TXSC/D, TXDATA[7:0], TXDATA[9:8]/RXCMD[2:3], and
TXCMD[1:0] inputs are sampled and passed to the encoder or serializer as
directed by other control inputs. These inputs are sampled on all consecutive
REFCLK cycles until TXEN is sampled deasserted.
PLL Frequency Reference Clock.
This clock input is used as the timing reference for the transmit and receive
PLLs. When the Transmit FIFO is bypassed (FIFOBYP is HIGH), REFCLK is
also used as the clock for the parallel transmit interface.
Speed Select.
Used to select from one of two operating serial rates for the CY7C9689. When
SPDSEL is HIGH, the signaling rate is between 100 and 200 MBaud. When
LOW, the signaling rate is between 50 and 100 MBaud. Used in combination
with RANGESEL and BYTE8/10 to configure the VCO multipliers and dividers.
Range Select.
Selects the proper prescaler for the REFCLK input. If RANGESEL is LOW, the
REFCLK input is passed directly to the Transmit PLL clock multiplier. If
RANGESEL is HIGH, REFLCK is divided by two before being sent to the Trans-
mit PLL multiplier.
When the Transmit FIFO is bypassed (FIFOBYP is LOW), with RANGESEL
HIGH or SPDSEL LOW, TXFULL toggles at half the REFCLK rate to provide a
character rate indication, and to show when data can be accepted.
Master Reset for Internal Logic.
Pulsed LOW for one or more REFCLK cycles.
12
REFCLK
TTL clock input
75
SPDSEL
Static control input
TTL levels
Normally wired HIGH
or LOW
74
RANGESEL
Static control input
TTL levels
Normally wired HIGH
or LOW
51
RESET
Asynchronous
TTL input
Pin Descriptions
(continued)
Pin
Name
I/O Characteristics
Signal Description
相關PDF資料
PDF描述
CY8C21323 PSoC Mixed-Signal Array(PSoC混合信號陣列)
CY8C21123 PSoC Mixed-Signal Array(PSoC混合信號陣列)
CY8C21223 PSoC Mixed-Signal Array(PSoC混合信號陣列)
CY8C21634-24AX PSoC Mixed-Signal Array
CY8C21534 PSoC Mixed-Signal Array
相關代理商/技術參數
參數描述
CY7C9915JXC-5 制造商:Rochester Electronics LLC 功能描述:- Bulk
CY7C9915JXI-1 功能描述:IC CLK BUFF SKEW 8OUT 32PLCC RoHS:是 類別:集成電路 (IC) >> 時鐘/計時 - 時鐘發生器，PLL，頻率合成器 系列:RoboClock™ 產品變化通告:Product Discontinuation 04/May/2011 標準包裝:96 系列:- 類型:時鐘倍頻器，零延遲緩沖器 PLL:帶旁路 輸入:LVTTL 輸出:LVTTL 電路數:1 比率 - 輸入:輸出:1:8 差分 - 輸入:輸出:無/無 頻率 - 最大:133.3MHz 除法器/乘法器:是/無 電源電壓:3 V ~ 3.6 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:16-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:16-TSSOP 包裝:管件 其它名稱:23S08-5HPGG
CY7C9915JXI-1T 功能描述:IC CLK BUFF SKEW 8OUT 32PLCC RoHS:是 類別:集成電路 (IC) >> 時鐘/計時 - 時鐘發生器，PLL，頻率合成器 系列:RoboClock™ 產品變化通告:Product Discontinuation 04/May/2011 標準包裝:96 系列:- 類型:時鐘倍頻器，零延遲緩沖器 PLL:帶旁路 輸入:LVTTL 輸出:LVTTL 電路數:1 比率 - 輸入:輸出:1:8 差分 - 輸入:輸出:無/無 頻率 - 最大:133.3MHz 除法器/乘法器:是/無 電源電壓:3 V ~ 3.6 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:16-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:16-TSSOP 包裝:管件 其它名稱:23S08-5HPGG
CY7C9915JXI-5 制造商:Cypress Semiconductor 功能描述:
CY7CD68321C-56LFXC 制造商:Rochester Electronics LLC 功能描述: 制造商:Cypress Semiconductor 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*