參數資料
型號： 97SD3248RPMK
廠商： MAXWELL TECHNOLOGIES
元件分類： DRAM
英文描述： 32M X 48 SYNCHRONOUS DRAM, 6 ns, QFP132
封裝： STACK, QFP-132
文件頁數： 30/40頁
文件大?。?/td> 758K
代理商： 97SD3248RPMK
97SD3248
M
em
o
ry
36
All data sheets are subject to change without notice
2004 Maxwell Technologies
All rights reserved.
1.5Gb (8-Meg X 48-Bit X 4-Banks) SDRAM
03.25.04 Rev 1
Writing
Refresh
Auto-Refresh: All the banks must be precharged before executing an auto-refresh command. Since the
auto-refresh command updates the internal counter every time it is executed and determines the banks and
the ROW addresses to be refreshed, external address specification is not required. The refresh cycle is
8192 cycles/6.4 ms. (8192 cycles are requires to refresh all the ROW addresses.) The output buffer
becomes High-Z after auto-refresh start. In addition, since a precharge has been completed by an internal
operation after the auto-refresh, an additional precharge operation by the precharge command is not
required.
Self-refresh1: After executing a self-refresh command, the self-refresh operation continues while CKE is
held Low. During self-refresh operation, all ROW addresses are refreshed by the internal refresh timer. A
self-refresh is terminated by a self-refresh exit command. Before and after self-refresh mode, execute auto-
refresh to all refresh addresses in or within 6.4ms period on the condition (1) and (2) below.
(1) Enter self-refresh mode within 7.8 us after either burst refresh or distributed refresh at equal interval until
all refresh addresses are completed.
(2) Start burst refresh or distributed refresh at equal interval to all refresh addreses within 7.8 us after exiting
from self-refresh mode.
Others
Power-down mode: The SDRAM enters power-down mode when CKE goes Low in the IDLE state. In
power-down mode, power consumption is suppressed by deactivating the input initial circuit. Power-down
mode continues while CKE is held Low. In addition, by setting CKE to High, the SDRAM exits from the
power-down mode, and command input is enabled from the next clock. In this mode, internal refresh is not
performed.
1. Self refresh mode should only be used at temperatures below 70°C.
相關PDF資料
PDF描述
97U870AKIT 97U SERIES, PLL BASED CLOCK DRIVER, 10 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), QCC40
97U870AH 97U SERIES, PLL BASED CLOCK DRIVER, 10 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PBGA52
97U870AHIT 97U SERIES, PLL BASED CLOCK DRIVER, 10 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PBGA52
97U870AKT 97U SERIES, PLL BASED CLOCK DRIVER, 10 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), QCC40
97U870AHT 97U SERIES, PLL BASED CLOCK DRIVER, 10 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PBGA52
相關代理商/技術參數
參數描述
97SD3248RPQE 制造商:MAXWELL 制造商全稱:Maxwell Technologies 功能描述:1.5Gb SDRAM 8-Meg X 48-Bit X 4-Banks
97SD3248RPQH 制造商:MAXWELL 制造商全稱:Maxwell Technologies 功能描述:1.5Gb SDRAM 8-Meg X 48-Bit X 4-Banks
97SD3248RPQI 制造商:MAXWELL 制造商全稱:Maxwell Technologies 功能描述:1.5Gb SDRAM 8-Meg X 48-Bit X 4-Banks
97SD3248RPQK 制造商:MAXWELL 制造商全稱:Maxwell Technologies 功能描述:1.5Gb SDRAM 8-Meg X 48-Bit X 4-Banks
97SG-1 制造商:EECO Switch 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*