參數資料
型號： 7513
英文描述： 7513 Group Datasheet Datasheet 1067K/FEB.06.01
中文描述： 7513組數據表數據表1067K/FEB.06.01
文件頁數： 31/66頁
文件大?。?/td> 1067K
代理商： 7513
30
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
MITSUBISHI MICROCOMPUTERS
7513 Group
[Transmit Buffer/Receive Buffer Register
(TB/RB)] 0018
16
The transmit buffer register and the receive buffer register are lo-
cated at the same address. The transmit buffer register is
write-only and the receive buffer register is read-only. If a charac-
ter bit length is 7 bits, the MSB of data stored in the receive buffer
register is “0”.
[Serial I/O1 Status Register (SIO1STS)] 0019
16
The read-only serial I/O1 status register consists of seven flags
(bits 0 to 6) which indicate the operating status of the serial I/O
function and various errors.
Three of the flags (bits 4 to 6) are valid only in UART mode.
The receive buffer full flag (bit 1) is cleared to “0” when the receive
buffer is read.
If there is an error, it is detected at the same time that data is
transferred from the receive shift register to the receive buffer reg-
ister, and the receive buffer full flag is set. A write to the serial I/O1
status register clears all the error flags OE, PE, FE, and SE. Writ-
ing “0” to the serial I/O1 enable bit (SIOE) also clears all the status
flags, including the error flags.
All bits of the serial I/O1 status register are initialized to “0” at re-
set, but if the transmit enable bit (bit 4) of the serial I/O1 control
register has been set to “1”, the transmit shift register shift comple-
tion flag (bit 2) and the transmit buffer empty flag (bit 0) become
“1”.
[Serial I/O1 Control Register (SIO1CON)] 001A
16
The serial I/O1 control register contains eight control bits for the
serial I/O1 function.
[UART Control Register (UARTCON) ]001B
16
This is a 5 bit register containing four control bits, which are valid
when UART is selected and set the data format of an data re-
ceiver/transfer, and one control bit, which is always valid and sets
the output structure of the P4
5
/T
X
D pin.
[Baud Rate Generator(BRG)] 0016
16
The baud rate generator determines the baud rate for serial trans-
fer.
The baud rate generator divides the frequency of the count source
by 1/(n + 1), where n is the value written to the baud rate genera-
tor.
I
Notes
When setting the transmit enable bit to “1”, the serial I/O1 transmit
interrupt request bit is automatically set to “1”. When not requiring
the interrupt occurrence synchronized with the transmission en-
abled, take the following sequence.
Set the serial I/O1 transmit interrupt enable bit to “0” (disabled).
Set the transmit enable bit to “1”.
Set the serial I/O1 transmit interrupt request bit to “0” after 1 or
more instructions have been executed.
Set the serial I/O1 transmit interrupt enable bit to “1” (enabled).
相關PDF資料
PDF描述
75160-101-36 STIFTLEISTE ABTRENNBAR 1REIHIG 36POL
75160-102-36 STIFTLEISTE ABTRENNBAR 1REIHIG 36POL
75160-105-36 STIFTLEISTE ABTRENNBAR 1REIHIG 36POL
75160-301-36 STIFTLEISTE ABTRENNBAR 1REIHIG 36POL
75160-302-36 STIFTLEISTE ABTRENNBAR 1REIHIG 36POL
相關代理商/技術參數
參數描述
75-130 制造商:Zierick Manufacturing Corporation 功能描述:
75130-1213 制造商:MOLEX 功能描述:
75-130477-52S 功能描述:Circular Connector 制造商:amphenol industrial operations 系列:- 包裝:- 零件狀態:有效 連接器類型:- 針腳數:- 外殼尺寸 - 插件:- 外殼尺寸，MIL:- 安裝類型:- 端接:- 緊固類型:- 朝向:- 侵入防護:- 外殼材料，鍍層:- 觸頭鍍層:- 特性:- 觸頭鍍層厚度:- 額定電流:- 電壓 - 額定:- 工作溫度:- 標準包裝:1
75-131018-1G 制造商:Amphenol Corporation 功能描述:75-131018-01G - Bulk
75-131018-1I 制造商:Amphenol Corporation 功能描述:75-131018-01I - Bulk
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*