á
XRT72L50
SINGLE CHANNEL DS3/E3 FRAMER WITH HDLC CONTROLLER
REV. 1.2.1
60
A "0" in this bit-field indicates that the LAPD Message Reception Complete interrupt has NOT occurred since
the last read of this register. A "1" in this bit-field indicates that the LAPD Message Reception Complete
interrupt has occurred since the last read of this register.
NOTE: For more information on the LAPD Receiver, refer to
2.3.2.16
Receive DS3 LAPD Status Register
Bit 6 - RxAbort (Receive Abort Sequence)
This Read-Only bit-field indicates whether or not the LAPD Receiver has detected the occurrence of an Abort
Sequence (e.g., a string of seven or more consecutive "1’s") from the remote LAPD Transmitter. A "0" in this
bit-field indicates that no Abort-Sequence has been detected. A "1" in this bit-field indicates that the Abort-
Sequence has been detected.
NOTE: For more information on the LAPD Receiver, refer to
Bits, 5 and 4 - RxLAPDType[1:0]
These two Read Only bit-fields combine to indicate the type of LAPD Message frame that has been received
by the LAPD Receiver. The relationship between these two bit-fields and the LAPD Message Type follows:
Bit 3 - RxCR (Command/Response) Type
This Read Only bit field indicates the value of the C/R (Command/Response) bit-field of the latest received
LAPD Message.
Bit 2 - Rx FCS (Frame Check Sequence) Error
This Read-Only bit-field indicates whether or not the LAPD Receiver has detected a Frame Check Sequence
(FCS) error in the most recently received LAPD Message Frame. A "0" in this bit-field indicates that the FCS
for the latest received LAPD Message Frame is correct. A "1" in this bit-field indicates that the FCS for the
latest received LAPD Message Frame is incorrect.
NOTE: For more information on the LAPD Receiver, refer to
Bit 1 - End Of Message
This Read-Only bit-field indicates whether or not the LAPD Receiver has completed its reception of the latest
incoming LAPD Message frame. The local P can poll the progress of the LAPD Receiver by periodically
reading this bit-field.
The LAPD Receiver will assert this read-only bit-field, when it has received a complete LAPD Message frame.
This bit-field, along with the Receipt of New LAPD Message frame interrupt, serves to inform the local P that
the Receive LAPD Message buffer contains a new PMDL message that needs to be read and processed.
RxDS3 LAPD Status Register (Address = 0x19)
BIT 7BIT 6BIT 5BIT 4BIT 3BIT 2BIT 1BIT 0
Not Used
RxAbort
RxLAPDType[1:0}
RxCR Type
RxFCS Error
End of
Message
Flag Present
RO
0
0000
000
RXLAPDTYPE[1:0]
MESSAGE TYPE
MESSAGE LENGTH
BIT 5BIT4
0
CL Path Identification
76 Bytes
0
1
Idle Signal Identification
76 Bytes
1
0
Test Signal Identification
76 Bytes
1
ITU-T Path Identification
82 Bytes