- 您現在的位置：買賣IC網 > PDF目錄4214 > XCV405E-8FG676C (Xilinx Inc)IC FPGA 1.8V C-TEMP 676-FBGA PDF資料下載
參數資料
| 型號： | XCV405E-8FG676C |
| 廠商： | Xilinx Inc |
| 文件頁數： | 37/118頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC FPGA 1.8V C-TEMP 676-FBGA |
| 產品變化通告： | FPGA Family Discontinuation 18/Apr/2011 |
| 標準包裝： | 1 |
| 系列： | Virtex®-E EM |
| LAB/CLB數： | 2400 |
| 邏輯元件/單元數： | 10800 |
| RAM 位總計： | 573440 |
| 輸入/輸出數： | 404 |
| 門數： | 129600 |
| 電源電壓： | 1.71 V ~ 1.89 V |
| 安裝類型： | 表面貼裝 |
| 工作溫度： | 0°C ~ 85°C |
| 封裝/外殼： | 676-BGA |
| 供應商設備封裝： | 676-FBGA（27x27） |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁當前第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁第61頁第62頁第63頁第64頁第65頁第66頁第67頁第68頁第69頁第70頁第71頁第72頁第73頁第74頁第75頁第76頁第77頁第78頁第79頁第80頁第81頁第82頁第83頁第84頁第85頁第86頁第87頁第88頁第89頁第90頁第91頁第92頁第93頁第94頁第95頁第96頁第97頁第98頁第99頁第100頁第101頁第102頁第103頁第104頁第105頁第106頁第107頁第108頁第109頁第110頁第111頁第112頁第113頁第114頁第115頁第116頁第117頁第118頁
Virtex-E 1.8 V Extended Memory Field Programmable Gate Arrays
DS025-2 (v3.0) March 21, 2014
Module 2 of 4
21
R
— OBSOLETE — OBSOLETE — OBSOLETE — OBSOLETE —
BUFGDLL Pin Descriptions
Use the BUFGDLL macro as the simplest way to provide
zero propagation delay for a high-fanout on-chip clock from
an external input. This macro uses the IBUFG, CLKDLL and
BUFG primitives to implement the most basic DLL applica-
tion as shown in Figure 24.
This symbol does not provide access to the advanced clock
domain controls or to the clock multiplication or clock divi-
sion features of the DLL. This symbol also does not provide
access to the RST, or LOCKED pins of the DLL. For access
to these features, a designer must use the library DLL prim-
itives described in the following sections.
Source Clock Input — I
The I pin provides the user source clock, the clock signal on
which the DLL operates, to the BUFGDLL. For the BUFG-
DLL macro the source clock frequency must fall in the low
frequency range as specified in the data sheet. The BUFG-
DLL requires an external signal source clock. Therefore,
only an external input port can source the signal that drives
the BUFGDLL I pin.
Clock Output — O
The clock output pin O represents a delay-compensated
version of the source clock (I) signal. This signal, sourced by
a global clock buffer BUFG symbol, takes advantage of the
dedicated global clock routing resources of the device.
The output clock has a 50-50 duty cycle unless you deacti-
vate the duty cycle correction property.
CLKDLL Primitive Pin Descriptions
The library CLKDLL primitives provide access to the com-
plete set of DLL features needed when implementing more
complex applications with the DLL.
Source Clock Input — CLKIN
The CLKIN pin provides the user source clock (the clock
signal on which the DLL operates) to the DLL. The CLKIN
frequency must fall in the ranges specified in the data sheet.
A global clock buffer (BUFG) driven from another CLKDLL,
one of the global clock input buffers (IBUFG), or an
IO_LVDS_DLL pin on the same edge of the device (top or
bottom) must source this clock signal. There are four
IO_LVDS_DLL input pins that can be used as inputs to the
DLLs. This makes a total of eight usable input pins for DLLs
in the Virtex-E family.
Feedback Clock Input — CLKFB
The DLL requires a reference or feedback signal to provide
the delay-compensated output. Connect only the CLK0 or
CLK2X DLL outputs to the feedback clock input (CLKFB)
pin to provide the necessary feedback to the DLL. The feed-
back clock input can also be provided through one of the fol-
lowing pins.
IBUFG - Global Clock Input Pad
IO_LVDS_DLL - the pin adjacent to IBUFG
If an IBUFG sources the CLKFB pin, the following special
rules apply.
1.
An external input port must source the signal that drives
the IBUFG I pin.
2.
The CLK2X output must feedback to the device if both
the CLK0 and CLK2X outputs are driving off chip
devices.
3.
That signal must directly drive only OBUFs and nothing
else.
These rules enable the software determine which DLL clock
output sources the CLKFB pin.
Reset Input — RST
When the reset pin RST activates the LOCKED signal deac-
tivates within four source clock cycles. The RST pin, active
High, must either connect to a dynamic signal or tied to
ground. As the DLL delay taps reset to zero, glitches can
occur on the DLL clock output pins. Activation of the RST
pin can also severely affect the duty cycle of the clock out-
put pins. Furthermore, the DLL output clocks no longer
de-skew with respect to one another. For these reasons,
rarely use the reset pin unless re-configuring the device or
changing the input frequency.
2x Clock Output — CLK2X
The output pin CLK2X provides a frequency-doubled clock
with an automatic 50/50 duty-cycle correction. Until the
CLKDLL has achieved lock, the CLK2X output appears as a
1x version of the input clock with a 25/75 duty cycle. This
behavior allows the DLL to lock on the correct edge with
respect to source clock. This pin is not available on the CLK-
DLLHF primitive.
Clock Divide Output — CLKDV
The clock divide output pin CLKDV provides a lower fre-
quency version of the source clock. The CLKDV_DIVIDE
property controls CLKDV such that the source clock is
divided by N where N is either 1.5, 2, 2.5, 3, 4, 5, 8, or 16.
This feature provides automatic duty cycle correction such
that the CLKDV output pin always has a 50/50 duty cycle,
with the exception of noninteger divides in HF mode, where
the duty cycle is 1/3 for N=1.5 and 2/5 for N=2.5.
Figure 24: BUFGDLL Schematic
CLK0
CLK90
CLK180
CLK270
CLK2X
CLKDV
LOCKED
CLKIN
CLKFB
RST
ds022_28_121099
CLKDLL
BUFG
IBUFG
O
I
O
I
相關PDF資料 |
PDF描述 |
|---|---|
| XCV405E-7FG676I | IC FPGA 1.8V 676-BGA |
| XC6VLX195T-1FFG784C | IC FPGA VIRTEX 6 199K 784FFGBGA |
| XC6VCX130T-2FFG784I | IC FPGA VIRTEX 6 128K 784FFGBGA |
| XC4VLX60-11FF668I | IC FPGA VIRTEX-4LX 668FFBGA |
| XC4VLX60-12FFG668C | IC FPGA VIRTEX-4 LX 60K 668FCBGA |
相關代理商/技術參數 |
參數描述 |
|---|---|
| XCV405E-8FG676I | 制造商:XILINX 制造商全稱:XILINX 功能描述:Virtex-E 1.8 V Extended Memory Field Programmable Gate Arrays |
| XCV405E-8FG900C | 制造商:XILINX 制造商全稱:XILINX 功能描述:Virtex-E 1.8 V Extended Memory Field Programmable Gate Arrays |
| XCV405E-8FG900I | 制造商:XILINX 制造商全稱:XILINX 功能描述:Virtex-E 1.8 V Extended Memory Field Programmable Gate Arrays |
| XCV50 | 制造商:XILINX 制造商全稱:XILINX 功能描述:Field Programmable Gate Arrays |
| XCV50-4BG256C | 功能描述:IC FPGA 2.5V C-TEMP 256-PBGA RoHS:否 類別:集成電路 (IC) >> 嵌入式 - FPGA（現場可編程門陣列） 系列:Virtex® 標準包裝:1 系列:Kintex-7 LAB/CLB數:25475 邏輯元件/單元數:326080 RAM 位總計:16404480 輸入/輸出數:350 門數:- 電源電壓:0.97 V ~ 1.03 V 安裝類型:表面貼裝 工作溫度:0°C ~ 85°C 封裝/外殼:900-BBGA，F(xiàn)CBGA 供應商設備封裝:900-FCBGA（31x31） 其它名稱:122-1789 |
發布緊急采購，3分鐘左右您將得到回復。