參數資料
型號： W947D6HBHX6E
廠商： WINBOND ELECTRONICS CORP
元件分類： DRAM
英文描述： 8M X 16 DDR DRAM, 5 ns, PBGA60
封裝： 8 X 9 MM, 0.80 MM PITCH, HALOGEN FREE AND LEAD FREE, VFBGA-60
文件頁數： 50/60頁
文件大小： 1160K
代理商： W947D6HBHX6E
W947D6HB / W947D2HB
128Mb Mobile LPDDR
Publication Release Date:Jun,17, 2011
- 54 -
Revision A01-003
19. tHZ and tLZ transitions occur in the same access time windows as valid data transitions. These parameters
are not referred to a specific voltage level, but specify when the device is no longer driving (HZ), or begins
driving (LZ).
20. tDQSQ consists of data pin skew and output pattern effects,
and p-channel to n-channel variation of the
output drivers for any given cycle.
21. The specific requirement is that DQS be valid (HIGH, LOW, or some point on a valid transition) on or before
the corresponding CK edge. A valid transition is defined as monotonic and meeting the input slew rate
specifications of the device. When no writes were previously in progress on the bus, DQS will be transitioning
from Hi-Z to logic LOW. If a previous write was in progress, DQS could be HIGH, LOW, or transitioning from
HIGH to LOW at this time, depending on tDQSS.
22. The maximum limit for this parameter is not a device limit. The device operates with a greater value for this
parameter, but system performance (bus turnaround) will degrade accordingly.
23. A low level on DQS may be maintained during High-Z states (DQS drivers disabled) by adding a weak pull-
down element in the system. It is recommended to turn off the weak pull-down element during read and write
bursts (DQS drivers enabled).
24. At least one clock cycle is required during tWR time when in auto precharge mode.
25. tDAL = (tWR/tCK) + (tRP/tCK): for each of the terms, if not already an integer,
round to the next higher
integer.
26. There must be at least two clock pulses during the tXSR period.
27. There must be at least one clock pulse during the tXP period.
28. A maximum of 8 Refresh commands can be posted to any given LPDDR SDRAM, meaning that the maximum
absolute interval between any Refresh command and the next Refresh command is 8*tREFI.
8.5.1 CAS Latency Definition (With CL=3)
CL=3
tLZmin
tRPRE
tDQSCKmin
tRPST
T5n
T5
T4n
T3n
T2n
T4
T3
T2
READ
NOP
Command
CK
DQS
All DQ,
collectively
1)DQ transitioning after DQS transition define tDQSQ window.
2)ALL DQ must transition by tDQSQ after DQS transitions, regardless of tAC
3)tAC is the DQ output window relative to CK,and is the long term component of DQ skew.
T0
T1
T2
T2n
T3
T3n
T4
T4n
T5
T5n
T6
tLZmin
相關PDF資料
PDF描述
W9602BB PUSHBUTTON SWITCH, SPST, MOMENTARY, 10A, 28VDC, PANEL MOUNT-THREADED
W9605BB PUSHBUTTON SWITCH, SPST, MOMENTARY, 10A, 28VDC, PANEL MOUNT-THREADED
W9606BB PUSHBUTTON SWITCH, SPDT, MOMENTARY, 10A, 28VDC, PANEL MOUNT-THREADED
W9712G8JB-3 DDR DRAM, PBGA60
W971GG6IB-25 32M X 16 DDR DRAM, 0.4 ns, PBGA84
相關代理商/技術參數
參數描述
W947D6HBHX6G 制造商:WINBOND 制造商全稱:Winbond 功能描述:128Mb Mobile LPDDR
W948D2FB 制造商:WINBOND 制造商全稱:Winbond 功能描述:256Mb Mobile LPDDR
W948D2FBJX5E 功能描述:IC LPDDR SDRAM 256MBIT 90VFBGA RoHS:是 類別:集成電路 (IC) >> 存儲器 系列:- 標準包裝:1 系列:- 格式 - 存儲器:閃存 存儲器類型:閃存 - NAND 存儲容量:4G（256M x 16） 速度:- 接口:并聯 電源電壓:2.7 V ~ 3.6 V 工作溫度:0°C ~ 70°C 封裝/外殼:48-TFSOP（0.724"，18.40mm 寬） 供應商設備封裝:48-TSOP I 包裝:Digi-Reel® 其它名稱:557-1461-6
W948D2FBJX5ETR 制造商:Winbond Electronics Corp 功能描述:256M MDDR, X32, 200MHZ
W948D2FBJX5I 制造商:Winbond Electronics Corp 功能描述:DRAM Chip DDR SDRAM 256M-Bit 8Mx32 1.8V 90-Pin VFBGA 制造商:Winbond Electronics Corp 功能描述:IC MEMORY
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*