參數資料
型號： W25P20-VSNI-G
廠商： WINBOND ELECTRONICS CORP
元件分類： PROM
英文描述： 2M X 1 FLASH 2.7V PROM, PDSO8
封裝： 0.150 INCH, GREEN, PLASTIC, SOIC-8
文件頁數： 2/35頁
文件大?。?/td> 1405K
代理商： W25P20-VSNI-G
W25P10, W25P20 AND W25P40
- 10 -
write disable state occurs upon power-up or after any of the following instructions: Write Disable, Page
Program, Sector Erase, Chip Erase and Write Status Register.
7.1.3
Block Protect Bits (BP2, BP1, BP0)
The Block Protect Bits (BP2, BP1, BP0) are non-volatile read/write bits in the status register (S4, S3,
S2) that provide Write Protection control and status. Block Protect bits can be set using the Write
Status Register Instruction (see tW in AC characteristics). All, none or a portion of the memory array
can be protected from Program and Erase instructions (see Status Register Memory Protection table).
The factory default setting for the Block Protection Bits is 0, none of the array protected. The Block
Protect bits can not be written to if the Status Register Protect (SRP) bit is set to 1 and the Write
Protect (/WP) pin is low. The W25P20 and W25P10 do not use BP2.
7.1.4
Reserved Bits
Status register bit locations 5 and 6 are reserved for future use. Current devices will read 0 for these
bit locations. It is recommended to mask out the reserved bit when testing the Status Register. Doing
this will ensure compatibility with future devices.
7.1.5
Status Register Protect (SRP)
The Status Register Protect (SRP) bit is a non-volatile read/write bit in the status register (S7) that can
be used in conjunction with the Write Protect (/WP) pin to disable writes to the status register. When
the SRP bit is set to a 0 state (factory default) the /WP pin has no control over the status register.
When the SRP pin is set to a 1, the Write Status Register instruction is locked out while the /WP pin is
low. When the /WP pin is high the Write Status Register instruction is allowed.
Figure 3. Status Register Bit Locations
相關PDF資料
PDF描述
W25Q128BVFAP 128M X 1 SPI BUS SERIAL EEPROM, PDSO16
W25Q128BVEIP 128M X 1 SPI BUS SERIAL EEPROM, PDSO8
W25Q128BVFIP 128M X 1 SPI BUS SERIAL EEPROM, PDSO16
W25Q16CLSFIP 16M X 1 SPI BUS SERIAL EEPROM, PDSO16
W25Q16CLDAIG 16M X 1 SPI BUS SERIAL EEPROM, PDIP8
相關代理商/技術參數
參數描述
W25P20VSNIG T&R 功能描述:IC FLASH 2MBIT 40MHZ 8SOIC RoHS:是 類別:集成電路 (IC) >> 存儲器 系列:SpiFlash® 標準包裝:1,000 系列:- 格式 - 存儲器:RAM 存儲器類型:移動 SDRAM 存儲容量:256M（8Mx32） 速度:133MHz 接口:并聯 電源電壓:1.7 V ~ 1.95 V 工作溫度:-40°C ~ 85°C 封裝/外殼:90-VFBGA 供應商設備封裝:90-VFBGA（8x13） 包裝:帶卷 (TR) 其它名稱:557-1327-2
W25P222A 制造商:WINBOND 制造商全稱:Winbond 功能描述:64K X 32 BURST PIPELINED HIGH-SPEED CMOS STATIC RAM
W25P222A-4 制造商:WINBOND 制造商全稱:Winbond 功能描述:64K X 32 BURST PIPELINED HIGH-SPEED CMOS STATIC RAM
W25P222A-4A 制造商:WINBOND 制造商全稱:Winbond 功能描述:64K X 32 BURST PIPELINED HIGH-SPEED CMOS STATIC RAM
W25P222AD-4 制造商:WINBOND 制造商全稱:Winbond 功能描述:64K X 32 BURST PIPELINED HIGH-SPEED CMOS STATIC RAM
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*