
DATA SHEET
MOS INTEGRATED CIRCUIT
μ
PD70741
V821
TM
32-/16-BIT MICROPROCESSOR
The
μ
PD70741 (V821) is a 32/16-bit RISC microprocessor that uses, as its processor core, the high-
performance 32-bit microprocessor
μ
PD70732 (V810
TM
) designed for built-in control applications. It incorporates
peripheral functions such as a DRAM/ROM controller, 2-channel DMA controller, real-time pulse unit, serial
interface, and interrupt controller.
The V821, which offers quick real-time response, high-speed integer instructions, bit string instructions, and
floating-point instructions, is ideally suited to use in OA equipment such as printers and facsimiles, image
processing devices such as those used in navigation units, portable devices, and other devices demanding
excellent cost performance.
The functions are described in detail in the following User’s Manuals, which should be read before
starting design work.
V821 User’s Manual Hardware
V810 Family
TM
User’s Manual Architecture : U10082E
: U10077E
FEATURES
The V810 32-bit microprocessor is used as the CPU core
Separate address/data bus
Address bus : 24 bits
Data bus
: 16 bits
Built-in 1-Kbyte instruction cache memory
Pipeline structure of 1-clock pitch
Internal 4-Gbyte linear address space
32-bit general-purpose registers: 32
Instructions ideal for various application fields
Floating-point operation instructions and bit string
instructions
Interrupts controller
Nonmaskable : 1 external input
Maskable
: 8 external inputs and 11 types of
internal sources
Priorities can be specified in units of four groups.
Wait control unit
Capable of CS control over four blocks in both memory
and I/O spaces.
Linear address space of each block: 16M bytes
Memory access control functions
Supports DRAM high-speed page mode.
Supports page-ROM page mode.
DMA controller (DMAC): 2 channels
Maximum transfer count: 65 536
Two transfer types (fly-by (1-cycle) transfer and
2-cycle transfer)
Three transfer modes (single transfer, single-
step transfer, and block transfer)
Serial interfaces : 2 channels
Asynchronous serial interface (UART):
1 channel
Synchronous serial interface (CSI):
1 channel
Real-time pulse unit
16-bit timer/event counter : 1 channel
16-bit interval timer
Watchdog timer functions
Clock generator functions
Standby functions (HALT, IDLE, and STOP modes)
: 1 channel
The information in this document is subject to change without notice.
The mark
shows major revised points.
Document No. U11678EJ4V0DS00 (4th edition)
Date Published June 1998 J CP(K)
Printed in Japan
1996