![](http://datasheet.mmic.net.cn/200000/TMS320LF2407APGEA_datasheet_15110592/TMS320LF2407APGEA_71.png)
TMS320LF2407A, TMS320LF2406A, TMS320LF2403A, TMS320LF2402A
TMS320LC2406A, TMS320LC2404A, TMS320LC2403A, TMS320LC2402A
DSP CONTROLLERS
SPRS145L JULY 2000 REVISED SEPTEMBER 2007
71
POST OFFICE BOX 1443
HOUSTON, TEXAS 772511443
LF240xA AND LC240xA ELECTRICAL SPECIFICATIONS DATA
absolute maximum ratings over operating free-air temperature ranges (unless otherwise noted)
Supply voltage range, VDD, PLLVCCA, VDDO, and VCCA (see Note 1)
0.3 V to 4.6 V
. . . . . . . . . . . . . . . . . .
VCCP range
0.3 V to 5.5 V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input voltage range, VIN
0.3 V to 4.6 V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output voltage range, VO LF240xA
0.3 V to 4.6 V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output voltage range,VO LC240xA
0.3 V to 4.6 V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input clamp current, IIK (VIN < 0 or VIN > VCC)
± 20 mA
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output clamp current, IOK (VO < 0 or VO > VCC)
± 20 mA
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating free-air temperature ranges, TA: A version
40
°C to 85°C
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S version
40
°C to 125°C
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Junction temperature range, TJ (see Note 2)
40
°C to 150°C
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range, Tstg (see Note 2)
65
°C to 150°C
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Clamp current stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress
ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating
conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES:
1. All voltage values are with respect to VSS.
2. Longterm hightemperature storage and/or extended use at maximum temperature conditions may result in a reduction of overall
device life. For additional information, see the IC Package Thermal Metrics Application Report (literature number SPRA953) and
the Reliability Data for TMS320LF24x and TMS320F281x Devices Application Report (literature number SPRA963).
recommended operating conditions§
MIN
NOM
MAX
UNIT
VDD/VDDO Supply voltage
VDDO = VDD ± 0.3 V
3
3.3
3.6
V
VSS
Supply ground
0
V
PLLVCCA
PLL supply voltage
3
3.3
3.6
V
VCCA
ADC supply voltage
3
3.3
3.6
V
VCCP
Flash programming supply voltage#
4.75
5
5.25
V
fCLKOUT
Device clock frequency (system clock)
2
40
MHz
VIH||
High-level input voltage
All inputs
2
VDD + 0.3
V
VIH||
High-level input voltage
All inputs
2
VDD + 0.3
V
VIL
Low-level input voltage
All inputs
0.8
V
VIL
Low-level input voltage
All inputs
0.8
V
Output pins Group 1k
2
mA
IOH
High-level output source current, VOH = 2.4 V
Output pins Group 2k
4
mA
IOH
High-level output source current, VOH = 2.4 V
Output pins Group 3k
8
mA
Output pins Group 1k
2
mA
IOL
Low-level output sink current, VOL = VOL MAX
Output pins Group 2k
4
mA
IOL
Low-level output sink current, VOL = VOL MAX
Output pins Group 3k
8
mA
TA
Free-air temperature
A version
40
85
°C
TA
Free-air temperature
S version
40
125
°C
TJ
Junction temperature
40
25
150
°C
Nf
Flash endurance for the array (Write/erase cycles)
40
°C to 85°C
10K
cycles
See the mechanical data package page for thermal resistance values, ΘJA (junction-to-ambient), ΘJC (junction-to-case), and Ψjt (junction-to-top
of case)
§ The drive strengths of the EVA PWM pins and the EVB PWM pins are not identical.
VCCA should not differ from VDD by more than 0.3 V.
# For applications that involve millions of power cycles, it is recommended that VCCP be powered after VDD.
|| The input buffers used in 240x/240xA are not 5-V compatible.
kPrimary signals and their groupings:
Group 1:
PWM1PWM6, T1PWM, T2PWM, CAP1CAP6, TCLKINA, IOPF6, IOPC1, TCK, TDI, TMS, XF, A0A15, RS
Group 2:
PS/DS/IS, RD, W/R, STRB, R/W, VIS_OE, D0D15, T3PWM, T4PWM, PWM7PWM12, CANTX, CANRX, SPICLK,
SPISOMI, SPISIMO, SPISTE, EMU0, EMU1, TDO, TMS2
Group 3:
TDIRA, TDIRB, SCIRXD, SCITXD, XINT1, XINT2, CLKOUT, TCLKINB