參數資料
型號： R5F2L387CDFP
元件分類： 微控制器/微處理器
英文描述： 8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP80
封裝： 12 X 12 MM, 0.50 MM PITCH, PLASTIC, LQFP-80
文件頁數： 20/74頁
文件大?。?/td> 959K
代理商： R5F2L387CDFP
28
2588F–AVR–06/2013
ATtiny261/461/861
When the PLL output is selected as clock source, the start-up times are determined by SUT fuse
bits as shown in Table 6-5.
6.2.3
Calibrated Internal 8 MHz Oscillator
By default, the Internal Oscillator provides an approximately 8 MHz clock signal. Though voltage
and temperature dependent, this clock can be very accurately calibrated by the user. See Table
shipped with the CKDIV8 Fuse programmed. See “System Clock Prescaler” on page 31 for
more details.
This clock may be selected as the system clock by programming the CKSEL Fuses as shown in
Table 6-6. If selected, it will operate with no external components. During reset, hardware loads
the pre-programmed calibration value into the OSCCAL Register and thereby automatically cal-
ibrates the RC Oscillator. The accuracy of this calibration is shown as Factory calibration in
Notes:
1. The device is shipped with this option selected.
2. If the oscillator frequency exceeds the specification of the device (depends on VCC), the
CKDIV8 Fuse can be programmed to divide the internal frequency by 8.
When this oscillator is selected, start-up times are determined by SUT fuses as shown in Table
Note:
1. If the RSTDISBL fuse is programmed, this start-up time will be increased to 14CK + 4 ms to
ensure programming mode can be entered.
2. The device is shipped with this option selected.
Table 6-5.
Start-up Times for the PLLCK
SUT1:0
Start-up Time from
Power Down
Additional Delay from
Power-On-Reset (V
CC = 5.0V)
Recommended
usage
00
14CK + 1K (1024) + 4 ms
4 ms
BOD enabled
01
14CK + 16K (16384) + 4 ms
4 ms
Fast rising power
10
14CK + 1K (1024) + 64 ms
4 ms
Slowly rising power
11
14CK + 16K (16384) + 64 ms
4 ms
Slowly rising power
Table 6-6.
Internal Calibrated RC Oscillator Operating Modes
CKSEL3:0
Nominal Frequency
0010
8.0 MHz
Table 6-7.
Start-up Times for the Internal Calibrated RC Oscillator Clock Selection
SUT1:0
Start-up Time
from Power-down
Additional Delay from
Reset (VCC = 5.0V)
Recommended
Usage
00
6 CK
14CK(1)
BOD enabled
01
6 CK
14CK + 4 ms
Fast rising power
6 CK
14CK + 64 ms
Slowly rising power
11
Reserved
相關PDF資料
PDF描述
R5F2L387CNFP 8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP80
R5F2L368CDFP 8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP64
R5F2L3AACDFA 8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP100
R5F2L3ACCDFA 8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP100
R5F2L38CCNFA 8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP80
相關代理商/技術參數
參數描述
R5F2L387CNFA#V0 制造商:Renesas Electronics Corporation 功能描述:IC MCU 16BIT 48KB FLASH
R5F2L387CNFP#30 制造商:Renesas Electronics Corporation 功能描述:R8C/L38C FL-48K, PLQP0080KB-A - Trays 制造商:Renesas Electronics Corporation 功能描述:IC MCU 16BIT 48KB FLASH 80LQFP
R5F2L387MDFA#V0 制造商:Renesas Electronics Corporation 功能描述:IC MCU 16BIT 48KB FLASH
R5F2L387MNFA#V0 制造商:Renesas Electronics Corporation 功能描述:R8C/L38M 48+4/6 80LQFP 14X14 -20 TO +85 - Trays 制造商:Renesas Electronics Corporation 功能描述:IC MCU 16BIT 48KB FLASH 80LQFP
R5F2L387MNFP#30 制造商:Renesas Electronics Corporation 功能描述:IC MCU 16BIT 48KB FLASH 80LQFP
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*