![](http://datasheet.mmic.net.cn/330000/PM7340_datasheet_16444385/PM7340_169.png)
PRELIMINARY
INVERSE MULTIPLEXING OVER ATM
PM7340 S/UNI-IMA-8
DATA SHEET
PMC-2001723
ISSUE 3
INVERSE MULTIPLEXING OVER ATM
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE
152
Register 0x204 – 0x206:RIPP Indirect Memory Data Register Array
Address
Bit
Type
Function
Default
0x204
15:0
R/W
MEM_DATA_LSB
0
0x206
15:0
R/W
MEM_DATA_MSB
0
MEM_DATA_LSB:
The MEM_DATA_LSB represents either: (1) the least significant 16 bits of the
data to be written to internal memory or (2) the least significant 16 bits of the
read data resulting from the previous read operation. The read data is not
valid until after the MEM_BUSY bit has been cleared.
MEM_DATA_MSB:
The MEM_DATA_MSB represents either: (1) the most significant 16 bits of
the data to be written to internal memory or (2) the least significant 16 bits of
the read data resulting from the previous read operation. The read data is not
valid until after the MEM_BUSY bit has been cleared.
The actual memory data structure is shown in Table 8 through Table 14.
Group Configuration Record Memory Area
The group configuration record area is located in the RIPP configuration memory.
There are 4 group configuration records that contain the PM programmed
configuration data for the corresponding groups. Each record is 16 words deep
by 32 bits wide, and is addressed by the group tag number.
MEM_ADDR = Area_base_address + Group_tag * 0x10 + Word Offset
Table 8 RIPP Group Configuration Record Structure
WORD
BIT
DATA FIELD
DESCRIPTION
0
31:24
IMA_OAM_LABEL
IMA OAM label value for the group.
This indicates the IMA version for the
current group, and is used to compare
against the IMA version number
carried in octet 6 of the incoming ICP
cells.