參數資料
型號: MC68HC05SR3
廠商: 飛思卡爾半導體(中國)有限公司
英文描述: High-density Complementary Metal Oxide Semiconductor (HCMOS) Microcontroller Units
中文描述: 高密度互補金屬氧化物半導體(HCMOS)微控制器單元
文件頁數: 49/96頁
文件大小: 3045K
代理商: MC68HC05SR3
MC68HC05SR3
Freescale
7-3
ANALOG TO DIGITAL CONVERTER
7
7.2
ADC Status and Control Register (ADSCR)
The ADSCR is a read/write register containing status and control bits for the ADC.
COCO — COnversion COmplete
1 (set)
An ADC conversion has completed; ADC Data Register ($0F)
contains valid conversion result.
0 (clear) –
ADC conversion not completed.
This read-only status bit is set when a conversion is completed, indicating that the ADC Data
Register contains a valid result. This COCO bit is cleared either by a write to the ADSCR or a read
of the ADC Data Register. Once the COCO bit is cleared, a new conversion automatically starts.
If the COCO bit is not cleared, conversions are initiated every 32 cycles. In this continuous
conversion mode the ADC Data Register is refreshed with new data, every 32 cycles, and the
COCO bit remains set.
ADRC — ADC RC Oscillator Control
1 (set)
ADC uses RC oscillator as clock source.
0 (clear) –
ADC uses internal processor clock as clock source.
The RC oscillator option must be used if the internal processor is running below 1MHz. A
stabilization time of typically 1ms is required when switching to the RC oscillator option.
ADON — ADC On
1 (set)
ADC is switched ON.
0 (clear) –
ADC is switched OFF.
When the ADC is turned from OFF to ON, it requires a time tADON for the current sources to
stabilize. During this time ADC conversion results may be inaccurate. Switching the ADC off
disables the internal charge pump and RC oscillator (if selected by ADRC=1), and hence saving
power.
CH2:CH0 — Channel Select Bits
These three bits selects one of eight ADC channels for the conversion. Channels 0 to 3
correspond to inputs AN0-AN3 on port pins PD0-PD3 respectively. Channels 4 and 5 are the ADC
reference inputs VRH and VRL, on port pins PD4 and PD5 respectively. Channels 6 and 7 are used
for internal reference points. Table 7-1 shows the signals selected by the channel select bits.
Address
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
State
on reset
$0E
COCO
ADRC
ADON
CH2
CH1
CH0
000- -000
TPG
51
05SR3.Book Page 3 Thursday, August 4, 2005 1:08 PM
相關PDF資料
PDF描述
MC68HC08MR4VFI 8-BIT, MROM, 8.2 MHz, MICROCONTROLLER, PQFP32
MC68HC08TV24CFB 8-BIT, FLASH, 8.2 MHz, MICROCONTROLLER, PQFP52
MC68HC705RC17DW 8-BIT, OTPROM, 2.097 MHz, MICROCONTROLLER, PDSO28
MC68HC705RC17P 8-BIT, OTPROM, 2.097 MHz, MICROCONTROLLER, PDIP28
MC74AC112DR2 AC SERIES, DUAL NEGATIVE EDGE TRIGGERED J-K FLIP-FLOP, COMPLEMENTARY OUTPUT, PDSO16
相關代理商/技術參數
參數描述
MC68HC05SU3A 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:Fully static chip design featuring the industry standard 8-bit M68HC05 core
MC68HC05T16 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:High-density complementary metal oxide semiconductor (HCMOS) microcontroller unit
MC68HC05V12 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:HCMOS Microcontreller Unit
MC68HC05V12CFN 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:General Release Specification
MC68HC05X16 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:High-density complementary metal oxide semiconductor HCMOS) microcontroller unit