參數資料
型號: MB91F158PMC1
廠商: FUJITSU LTD
元件分類: 微控制器/微處理器
英文描述: RISC MICROCONTROLLER, PQFP120
封裝: 14 X 14 MM, 1.70 MM HEIGHT, 0.40 MM PITCH, PLASTIC, LQFP-120
文件頁數: 5/92頁
文件大?。?/td> 2193K
代理商: MB91F158PMC1
MB91F158 Series
DS07-16316-2E
13
The following figure shows an example usage of an external clock.
Figure 3.1 An example usage of an external clock
Care during operating of PLL clock mode
If the PLL clock mode is selected, the microcontroller attempt to be working with the self-oscillating circuit even
when there is no external oscillator or external clock input is stopped. Performance of this operation, however,
cannot be guaranteed.
Watchdog timer function
The watchdog timer supported by the FR family monitors the program that performs the reset delay operation
for a specified time. If the program hangs and the reset delay operation is not performed, the watchdog timer
resets the CPU. Therefore, once the watchdog timer is enabled, operation continues until the CPU is reset.
As an exception, a reset delay automatically occurs if the CPU stops program execution. For the conditions
that apply to this exception, refer to the section that describes the watchdog function.
4.
Care during Powering Up
When powering up
When turning on the power supply, never fail to start from setting the RST pin to “L” level. And after the power
supply voltage goes to VCC level, at least after ensuring the time for 5 machine cycle, then set to “H” level.
Source oscillation input
At turning on the power supply, never fail to input the clock before cancellation of the oscillation stabilizing
waiting.
Power on resetting
When powering up or when turning the power back on after the supply voltage drops below the operation
assurance range, be sure to reset the power.
Power on sequence
Turn on the power in the order of VCC, AVCC and AVRH. The power should be disconnected in inverse order.
Even when an A/D converter is not in use, connect AVCC to the VCC level and AVSS to the VSS level.
Even when a D/A converter is not in use, connect DAVC to the VCC level and DAVS to the VSS level.
X0
X1
MB91F158 series
相關PDF資料
PDF描述
MB91F233APFF-GE1 32-BIT, FLASH, 33.6 MHz, RISC MICROCONTROLLER, PQFP120
MB91F249PFV-GSE1 32-BIT, FLASH, 32 MHz, RISC MICROCONTROLLER, PQFP144
MB91F355APMT 32-BIT, FLASH, 50 MHz, RISC MICROCONTROLLER, PQFP176
MB91F367GB 32-BIT, FLASH, 64 MHz, RISC MICROCONTROLLER, PQFP120
MB91F368GB 32-BIT, FLASH, 64 MHz, RISC MICROCONTROLLER, PQFP120
相關代理商/技術參數
參數描述
MB91F191A 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:32-bit Proprietary Microcontroller
MB91F191APFF 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:32-bit Proprietary Microcontroller
MB91F192 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:32-bit Proprietary Microcontroller
MB91F192LGA 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:32-bit Proprietary Microcontroller
MB91F192PFF 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:32-bit Proprietary Microcontroller